User manual

Network Configuration
700-0055 R001 3–7
4. Select Serial, set the Port to COM1 (or to the COM port that will be used).
5. Click OK.
6. In the Setup menu, select Terminal.
Figure 3-7 appears.
7. Set the Terminal ID to VT100. Click OK.
8. In the Setup menu, select Serial Port.
Figure 3-8 appears.
9. Enter the standard settings for the serial port, as shown in Figure 3-8.
10. Click OK.
Figure 3-7 Tera Term: Terminal setup window
Figure 3-8 Tera Term: Serial port setup window