User guide

Managing Video Files
700-0036 R005 3–7
Menu Description
Set Channel Depending on your DVR, select from 1 to 9 to set the video channel.
Display Mode • Select 1 to show one video channel.
• Select 4 to show four video channels. For TR1, select 1 or 4.
• Select 9 to show nine video channels.
• If no camera was attached to the video channel, the screen appears blue.
Audio •
OFF to turn the audio off.
• ON to turn the audio on.
• Select 1, 2, 3, or 4 for audio on that audio channel, depending on the
media source.
Archive To archive all video channels and Signal/Speed/GPS data to an .eds file on
your computer’s disk, see page 3–10.
Save Image To save the video image on your computer’s hard drive, see page 3–12.
Print Image To print the video image, select your print location from the print menu.
Save Log File Save .log file to your computer’s hard drive.
Signal Filters Click on Signal Filters to display the Configure Signal Filters dialog box. If
you select a signal, for example Signal 01, it appears in the Events list as a
signal event, S01, for example.