User guide

Installation and Setup
700-0036 R005 2–17
2.6.1. Inserting a Hard Drive into the HD Reader
To insert a hard drive into the HD Reader:
1. Follow the instructions for your DVR to remove the hard drive from the DVR.
2. Insert the hard drive key, turn counter clockwise by ¼ turn until the drive lock is
in the unlocked position. See Figure 2-5.
3. Slide the DVR hard drive into the HD Reader until the hard drive is flush with the
front of the HD Reader when the handle is closed.
4. Insert the hard drive key, turn clockwise by ¼ turn until drive lock is in the locked
position.
5. Turn the HD Reader power switch to
ON.
The hard drive power indicator (green) illuminates when the hard drive is properly
inserted and locked. The hard drive access indicator (red) flashes once or twice.
6. Wait for the computer to detect a USB connection.
The Safely Remove Hardware icon appears in the notification area on your
computer.
If Windows does not recognize the drive on the first power up, power the HD
Reader
OFF. Reseat the hard drive until the hard drive is flush with the front of the
HD Reader when the handle is closed. Restart the HD Reader. If Windows does
not recognize the hard drive on the second power up, contact Customer Service.
7. Start the vMax software as described in page 3–1.
CAUTION: Equipment damage
Make sure the hard drive is compatible with the HD Reader. Inserting an incompatible hard drive
into the HD Reader can seriously damage both devices.
Important: Make sure the power switch on the back of the HD Reader is OFF before inserting a hard
drive into the HD Reader.
Figure 2-5 HD Reader Front Panel
Hard drive power indicator (green)
Hard drive lock
Hard drive access indicator (red)