User guide

Installation and Setup
700-0036 R005 2–7
7. Verify the settings and click Install.
vMax installs on your computer.
8. Click Finish to exit Setup.
2.2.2. Installing the vMax with Tracking Software
1. Close all programs and temporarily disable any virus protection software running
on your computer.
Software activation is required after installing the vMax with Tracking and
MapPoint software.
2. Insert the vMax software CD into your CD-ROM drive.
The autorun.exe program should launch automatically on your computer.
If the installer does not launch automatically, run the program called CDAuto.exe
from your CD. Click on My Computer on your desktop and click on the CD drive.
Double click on the CDAuto.exe program.