Use and Care Manual

English

Locking/Unlocking Your Safe

Enter the 5 digit factory code on the back of this owner’s

manual. Then press the “Prog/Enter>>” key.

The unlocked padlock icon ( ) appears.

You will have 4 seconds to turn the handle to

unlock your safe.

Rotate the handle downward to open the door.

This may take a limited amount of force if you have

a water-resistant safe.

NOTE: •Ifyouexertexcessiveforceonthehandle,thehandlewillbreak.Thisfeatureisdesigned

to protect the bolts from being over powered by force.

 •GreenLEDlightcomesonafteryouentervalidcode,andremainslitduringthe

4-second period in which the safe can be opened.

A. Close the door, and pull the handle upwards until the handle

is horizontal.

For water-resistant units, additional pressure to the

front, left side of the door may need to be applied

prior to rotating the handle.

B. FOR DUAL KEY LOCK, insert key, push in lock cylinder, and

turn key to left to the locked position, then remove the key.

NOTE: •The5digitfactorycodecannotbedeleted.However,youmayaddanddeleteadditional

codes (see next page).

 •Ifyoursafedoesnotappeartobeworkingproperly,pleasechecktomakesureyouare

using NEW alkaline batteries before contacting SentrySafe Customer Care.

Locking your safe