Use and Care Manual

4 5
English
2
Rotate dial to the left (counterclockwise). Go PAST the second
number of your combination ONCE and stop the SECOND time
the dial reaches the number.
3
Rotate the dial to the right (clockwise), stop when you reach
the third number in your combination.
4
Pull handle outward to open the door.
1
Close the door to re-engage locking bolts.
2
Turn key to the ‘locked’ position.
1
Close the door to re-engage locking bolts.
2
Spin the dial at least 2x to the right (clockwise)
to scramble the lock.
NOTE: • Safe will not lock until the combination dial is scrambled.
• Safe will not lock unless key cylinder is turned to the locked position.
NOTE: • Store combination (and keys if equipped) in a secure
location (other than in the safe).
• Combination can not be changed.
• DO NOT RETURN! Questions or concerns, call us at
1-800-828-1438.
Find your combination on the back of this owner’s manual.
FOR SAFES WITH OVERRIDE KEY ONLY
Keys are shipped outside of the safe. Be sure to locate them before
locking your safe.
WARNING
Test your combination several times before putting valuables inside.
1
Insert key into the cylinder, turn to the ‘unlocked’ position.
2
Pull handle outward to open the door.
1
Rotate dial to ‘0’, then rotate right (clockwise) passing ‘0’ three
times, continue rotating until you reach the first number in your
combination.
Mechanical Combination Lock
FPW082TEST
SN100TEST01*
10-22-33
RLR
2075
Preparing your safe for first time use
Unlocking your safe using the override key only (for select models)
Unlocking your safe using the combination dial
Locking your safe using the override key (for select models)
Locking your safe using the combination dial