User`s manual

31
 Send HTTP notification
Check this item, select the destination HTTP address, and specify the
parameters for event notifications by <Motion Detection> triggered.
When an alarm is triggered, the notification can be sent to the specified
HTTP server.
For instance, if the custom parameter is set as” action=1&group=2”, and
the HTTP server name is”
http://192.168.0.1/admin.php”, the notification
will be sent to HTTP server as” http://192.168.0.1/admin.php?
action=1&group=2” when alarm is triggered.
File Name
Enter a file name in the blank, ex. image.jpg. The uploaded image’s file name
format can be set in this section. Please select the one that meets your
requirements.
 Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
 Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
 Add sequence number suffix up to # and then start over
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the
setting is up to “10,” the file name will start from 00, end at 10, and then
start all over again.
 Overwrite
The original image in the FTP site will be overwritten by the new
uploaded file with a static filename.