User`s manual

22
2.2.6 FTP
The FTP setting can be found under this path: System> FTP.
The Administrator can set as sending alarm message to a specific File Transfer
Protocol (FTP) site when event is triggered. Users can assign alarm message to
up to two FTP sites. Enter the FTP details, which include server, server port,
user name, password and remote folder, in the fields. Check the box “passive
mode” to be connected with the FTP server by passively receiving the FTP
server’s IP address through a dynamic port. Alternatively, uncheck the box to
directly connect the FTP server via active mode.
Click on <Save> when finished.
2.2.7 HTTP
The HTTP setting can be found under this path: System> HTTP.
A HTTP Notification server can listen for notification messages from IS-IP290s by
triggered events. Enter the HTTP details, which include server name (for
instance, http://192.168.0.1/admin.php), user name, and password in the fields.
<Alarm> triggered and <Motion Detection> notifications can be sent to the
specified HTTP server.
Click on <Save> when finished.
Please refer to: Appl ication> Send HTTP n otifica tion/ Motion Detection for
HTTP Notification settings.