Instruction manual

4.3 Operation Functions

To operate more advance functions, it is simply by using

MODE button to change. The sequential operations and

the corresponding explanations are shown in the following

flow-chart.

Operation Mode

Mode

SCAN

MIN

AVG

HAL

LAL

Parameter Setup mode

●Scan and display the temperature

during measurement.

●The maximum temperature within

one shot measuring..

●The minimum temperature within

one shot measuring.

●The average temperature within

one shot measuring.

●The highest and lowest temperature

difference within one shot measuring

●Recall the stored data by using

or button.

● Emissivity for more accuracy

on different materials.

●Highest alarm temperature setting.

●Lowest alarm temperature setting.

(* The parameters are adjusted by

using or buttons.)

DATA

MAX