Specifications

HITCH FABRICATION, INSTALL PARTS & TOW BARS
Designed for use in fabricating undercar receiver hitches when a Max-E-Loader or Receiver is not available.
• Made of cold formed structural tubing
• Sized and punched to fit all common weight-distributing hitch ball mounts or utility ball mounts
PART NO. LENGTH SIZE
2850 6” 2” x 2”
2851 12” 2” x 2”
2898 18” 2” x 2”
2852 24” 2” x 2”
2853 36” 2” x 2”
2854 48” 2” x 2”
3006 6” 1 1/4” x 1 1/4”
5692 18” 2” x 2”” Forged Collar
COMBO BARS
PART NO. DESCRIPTION
5780 Load Master Trailer Tongue Weight Scale
Hydraulic pressure guage - 0 to 2000 lbs.
6939 4 oz. tube - Hitch Ball Lube
4822 7/16” Bolt Buddies - Qty. 25
4823 1/2” Bolt Buddies - Qty. 25
5481 7/16” Wire Forms Fishwire Tools - Qty. 20
5482 1/2” Wire Forms Fishwire Tools - Qty. 20
HITCH INSTALLATION TOOLS
PART NO. DESCRIPTION
18027 Circuit Tester
18149 Wireless Circuit Tester
18179
7-Way Circuit Tester
3808 Economy Circuit Tester
4593 4-Flat Circuit Tester
40376 Heavy-Duty Circuit Tester Kit
1
1755
Dielectric Grease - 2 oz. tube
6447 Liquid Electrical Tape - 4 oz. can
ELECTRICAL INSTALLATION TOOLS
Designed for use in fabricating undercar receivers. The receiver opening is two inches square, and
will accept all common weight-distributing hitch ball monts and utility ball mounts.
PART NO. DESCRIPTION
E17 (=DRT1251) Hitch Box
HITCH BOX
2868
34141
Safety Chain Loops
10,000 lb. Class IV
E17
6939
5481 5482
4822
4823
18027
6447
1
1755
18149
3808
3808
5780
18179
4593
40376
83