Specifications

ELECTRIC OVER HYDRAULIC BRAKE SYSTEMS
57
HydraStar XL and ElectraStar
Model Numbers
HBAC10-CLR* 1000 psi HydraStar XL Hydraulic
Brake
Actuator/Controller with Plug-in Command
Unit ( Recommended for drum brakes. Consult
brake manufacturer for maximum pressures)
HBAC12-CLR* 1200 psi HydraStar XL Hydraulic
Brake Actuator/Controller with Plug-in Command
Unit ( Recommended for disc brakes. Consult
brake manufacturer for maximum pressures)
HBAC16-CLR* 1600 psi HydraStar XL
Hydraulic
Brake Actuator/Controller with Plug-in Command
Unit ( Recommended for Dexter brand disc brakes.
Consult Dexter for maximum pressures)
EBAC-CLR* ElectraStar Electric Brake
Actuator/Controller with Plug-in Command Unit
HBA-EBA Electronic Breakaway kit/17 amp hour
battery pack
CLR Carlisle Plug-In Command Unit
* Requires HBA-EBA breakaway kit/battery pack
Specifications
In cab controller required-
Controller trailer brake pressure from the driver seat. For optimum performance use:
Carlisle (HSC) Controller
12 volt DC operation-
Federal regulations require a battery and breakaway kit on trailer. Carlisle (HBA-BA) kit
recommended, works with any 5 amp hr. breakaway kit
Electrical connections-
Recommended minimum wire; 12-gauge for splicing into power and ground. 16-gauge
for controller output and breakaway
Hydraulic brakes-
For use with DOT 3 or DOT 4 brake fluid systems
Output pressure-
1000, 1200, or 1600 psi pressures for various trailer brake configurations - prevents over pressurizing your brakes and damaging seals
Trailer-mounted and self-contained weather tight enclosure
Dimensions-
11.8” long x 3” wide x 7.3” high, shipping weight 12 lbs.
Accessories-
- Breakaway battery kit (HBA-BA)
Automatically applies the trailer brakes in the event the trailer and towing vehicle become seperated
- 1/4” line adapter (HBA-BLC)
Allows conversion to 1/4” brake line
1/4”brake lines improve braking performance on trailers over 20’
and/or with triple axles
HydraStar Model Numbers
HBA10 1000psi HydraStar Brake Actuator
HBA12 1200psi HydraStar Brake Actuator
HBA16 1600psi HudraStar Brake
Actuator
HBA-BA Electronic Breakaway Kit/5 Amp hour Battery Pack
Superior to Surge Brakes
In addition to optimizing your trailer brake system for greater control and safety
, HydraStar actuators solve many of the problems associated
with traditional surge brake systems
Meets all DOT regulations and complies with CFR-393 federal braking requirements, as opposed to surge brakes
Eliminates the feel of being “pushed” by the trailer (reducing the potential for jacknife)
Eliminates brake drag common with surge brakes on a downhill grade
Cost effective replacement for vacuum over hydraulic systems
Specifications
• Microprocessor/accelerometer control
• Six variable load control settings
• Plug-in Carlisle Command Center remote control unit
• 12 volt DC/17 amp-hour battery - Required
• requires a battery and breakaway kit on trailer
Electrical connections-
requires splicing into the trailer’s left/right turn, running light, and ground wires.
Hydraulic brakes-
for use with DOT 3 or DOT 4 brake fluid systems
Output pressure-
HBAC10 - 1000 psi
HBAC12 - 1200 psi
HBAC16 - 1600 psi
Trailer-mounted and self -contained
Built in 3-amp battery charger automatically charges trailer battery
Breakaway System (included with HBA-EBA)
automatically applies the trailer brakes and illuminates the trailer stoplights in the event the
trailer and towing vehicle become seperated.
Dimensions-
Hydrastar XL - 16.4” long x 5.4” wide x 7” high Shipping weight: 18lbs
ElectraStar - 10.5” long x 2.5” wide x 4.5” high Shipping weight: 4.4 lbs
Battery kit - 10” long x 6” wide x 8” high Shipping weight: 17lbs