Specifications

133
COOLERS AND ACCESSORIES
The Draw-Tite Engine Oil Cooler fits American and Import vehicles and provides engine oil cooling
protection. Kit includes:
1. Exclusive aluminum inner turbulator design agitates the oil in a continuous swirling pattern provid-
ing maximum surface contact for greatest cooling efficiency.
2. Exclusive internal thermostat controls oil flow through engine oil cooler.
-Directs oil through oil cooler at pre-set temperature.
-Full flow design cools all oil going to the bearings.
-Allows fast warm-up with oil cooler turned off.
-Eliminates sludge build-up caused by overcooling of the engine.
3. Quick connect fittings and hardware provided.
4. 12 ft. of hose and easy do-it-yourself step-by-step instructions...no special tools required.
Engine Oil Cooler
OIL FILTER
PART VEHICLE DIMENSIONS COOLING THREAD
NO. APPLICATIONS THICK WIDTH LENGTH RANGE SIZE
4678 All Except Chevy V-8, 3/4” 7 1/2” 13” Medium Duty 3/4”, 13/16”
with 3 1/8” Oil Filter 18mm, 20mm
O-Ring Dia
Note: For applications involving Chevy V-8 engines with 3 1/8” oil filter O-ring diameter, you must purchase
Chevy V-8 installation kit #4679 and aluminum engine oil line kit #4685.
ENGINE OIL COOLER & ACCESSORIES
PART NO. APPLICATIONS
MOUNTING KIT
4680 Quick Connect Mounting Kit, Includes:
4 Nylon Mounting, Locking Nuts & Rubber Pads.
ENGINE OIL COOLER ACCESSORIES