Specifications

15
F-Series for Lamp Working
Anneal large glass figurines
T
he F-Series lamp working kilns come in
three sizes: the 120 volt F-120 and F-130
Elite; and the 240 volt F-240.
Raise the spring-loaded vertical-drop door to
insert a glass figurine with a punty rod. Lower the
door. The punty rod extends outside the firing
chamber through the smaller door. This allows
the glass to anneal safely.
Make figurines up to 5” tall in the F-120 and
11” tall in the F-130 Elite and F-240. Maintain
the annealing temperature indefinitely with the
Sentry Xpress 3-key controller.
Ease of operation will delight you. Never be
-
fore has lamp work been so easy in this price
range. Imagine the massive, award-winning figu
-
rines you will be able to make with these kilns.
The element is mounted in the top of the kiln,
so in addition to annealing, you can also fuse
and slump glass. For your safety we do not in
-
clude sidewall elements, but you can order them
with the F-240 if desired.
G
Digital Sentry Xpress
with 8 Segment
Ramp-Hold, Skip
Segment and Program
Review
G
The controller stores 4 programs in memory.
G
The element groove in the roof eliminates pins.
G
On/off switch
G
Safety pilot light
G
2 ½” insulating refractory firebricks
G
Electrical components stay cool in a
slotted base.
F-120 & F-130 Elite Furniture Kit
1 C-10S Shelf
4 - ½” long 1” wide Square Posts
1 lb. Bag Glass Separator
Shipping Weight: 12 lbs.
F-240 Furniture Kit
1 C-17 Shelf
4 - ½” long 1” wide Square Posts
1 lb. Bag Glass Separator
Shipping Weight: 13 lbs.
F-120
Digital Automatic
(Not Shown)
Firing Chamber: 11” deep,
10 ¾” wide x 7” high
5-15R
1 3/8" dia.
F-240
Digital Automatic
(Not Shown)
Firing Chamber: 18” deep,
18” wide x 13” high
6-20R
1 3/8" dia.
The F-240
uses the
6-20R.
Fusion-Series Glass Kilns
Glass fusing and slumping
“I’ve fired your kilns all over the coun-
try during my seminars. I never hear
complaints about your kilns. They are re-
liable and last a hell of a long time.”
Dan Fenton, Fenton Glass
Studio, Oakland, California
Fusion-10
Digital Automatic
10-sided Firing Chamber:
23 ½” wide x 11” deep
P
aragon’s Fusion-series digital hot glass
kilns are packed with exciting features.
They come in 6-, 7-, 8- and 10-sided
versions.
The digital Sentry Xpress 3-key controller
comes standard on all Fusion-series kilns.
Control both heating and cooling with simple
3-key operation. (See page 4.)
The Fusion-8 and Fusion-10 are 11” deep and
include a heating element in the sidewalls. Enjoy
enhanced heat control with fusing, slumping, and
embossing.
The Fusion-series lid elements use a new ele
-
ment groove that eliminates element pins. Because
the element coils are wider than the groove open
-
ing, the elements stay in place without pins.
The Fusion-8 and Fusion-10 fire on 240 volts.
The Fusion-6 and Fusion-7 offer the convenience
of 120 volt operation.
G
Digital Sentry Xpress: 8 segments, 4 programs
G
Heating elements in the top of all models
G
Heating elements in the sidewalls of the
Fusion-8 and Fusion-10
G
¼” heavy duty sheathed Type-K
thermocouple
G
2½”insulatingrefractory
firebrick in walls and bottom; 3”
firebrick lid
G
Lock-in lid support on 7-, 8- and
10-sided Fusion-series; chain lid
support on the Fusion-6 (not
shown)
G
Optional LiteLid lid spring on the
Fusion-10
G
Full-formed galvanized steel base
G
Louvered switch box, heavy duty wiring
G
Tapered
peephole with
plug for a wide
view
5-15R
1 3/8" dia.
Fusion-7
Digital Automatic
7-sided Firing Chamber:
14 ¼” wide x 6 ½” deep
Fusion-8
Digital Automatic
8-sided Firing Chamber:
17 ½” wide x 11” deep
6-30R
2" dia.
6-20R
1 3/8" dia.
F-130 Elite
Digital Automatic
Firing Chamber: 11” deep,
11” wide x 13” high
Fusion-6
Digital Automatic
(Not Shown)
6-sided Firing Chamber:
11” wide x 6 ½” deep
NEW!