Instruction manual

Shorthand Instructions
Read the safety guidelines, page 2. After pressing the keys in the left column, the message in the center will appear. For more
detailed instructions, see Single Segment, page 5, or Ramp-Hold, page 6.
Single Segment
Keys to Press Display
IdLE
SPd1 - PrOG
(Not Down Arrow) Select rate SPd1 (Sample rate)
°F or °C
Enter temperature 1900 (Sample temperature)
HLd
Enter hold time 00.00 (Or hold time)
Strt
-O n- The kiln is now firing.
Ramp-Hold
Keys to Press Display
IdLE
SPd1 - ProG
(Not Down Arrow) Select ProG ProG
rA 1
Enter Segment 1 rate 500 (Sample rate)
°F 1 or °C 1
Enter Temperature 1900 (Sample temperature)
HLd1
Enter Hold Time 00.00 (Or hold time)
First segment not needed: enter a rate of 0000.
Strt
-O n- The kiln is now firing.