Product specifications

ManualsBrandsSentry ManualsConsumer electronicsSentry 2.0

Sentry® 2.0 Intelligent Bezel Software Guide April, 2013

REMOTE ACCESS DEVICE

The Sentry 2.0 Remote Access Device is used to access several modes of opera-

tion.

1. Aim the Remote Access Device (RAD) at the Sentry 2.0 Bezel, then press and hold

down the RAD button until

"Attendant Mode" appears on the Display Screen.

2. After releasing the RAD button, the

"Attendant Mode" screens are displayed. Press

the RAD button again to display the screens for the Technician (if activated).

3. Press the RAD button again to return to the

“Player Mode” screens.

ATTENDANT MODE

In Attendant Mode, an Attendant can examine the last five Banknotes inserted, the

Cash Box volume level, and the type of Banknote Validator error that has

occurred, if any. The

Attendant Mode menu options are displayed on the Sentry

2.0 Bezel.

Use either of the following procedures to enter or exit from

Attendant Mode:

NTER

XIT

TTENDANT

ODE

USING

1. Launch the Sentry 2.0 Download and Configuration Utility software on your PC.

2. Connect a Micro-USB cable between your PC and the Controller Circuit Board

Micro-USB connector.

3. From your PC, click the Configuration Utility’s Diagnostics tab.

4. From the Set Mode field, click the Attendant radio button.

The Attendant Mode menu options are displayed on the Sentry 2.0 Bezel.

NTER

XIT

TTENDANT

ODE

USING

OPTIONAL

EMOTE

CCESS

EVICE

1. Aim the Remote Access Device toward the Sentry 2.0 Bezel.

2. Press the Remote Access Device’s pushbutton.

To switch from Attendant Mode to Technician Mode, repeat Steps 1 and 2 above.

NOTE: The Display Screen should transition to Attendant Mode in approximately

one (1) second.

NOTE: The Display Screen should transition to Technician Mode in approximately

two (2) seconds.

NOTE: If the Player Mode is not enabled with the RAD, the Sentry 2.0 will time out

and return to Player Mode automatically.

NOTE: To exit from Attendant Mode, click the Player (or Technician)

radio buttons in the Set Mode field. The Sentry 2.0 reverts to Player

Mode if no other activity occurs in the Time Set for Mode Timeout.

NOTE: If the Attendant/Technician Mode Timeout slider is set (Figure 7

a),

the Sentry 2.0 Bezel automatically returns to Player Mode after the

Attendant/Technician Mode Timeout Period expires.

April, 2013 Software Guide Sentry® 2.0 Intelligent Bezel

Figure 5 SENTRY 2.0 “Connected” Configuration Screen and

“Clear Denominations” Button