Product specifications

Part No. 960-000159R_Rev. 1 © 2013, JCM Global, Corporation
6
Sentry® 2.0 Intelligent Bezel Software Guide April, 2013
LCD CONFIGURATION
B RIGHTNESS & C ONTRAST
The Sentry 2.0 “Configuration” tab features twin slider bars to configure LCD
Brightness and Contrast (Figure 2 a) when the Banknote Validator is enabled (in
operational mode). The Brightness settings range from “0” (lowest brightness) to
“255” (maximum brightness). The Contrast settings range from “0” (lowest) to
“255” (maximum).
G RAPHIC E NABLE /D ISABLE
To enable and display Custom Graphics in the Player screen:
• From the “Configuration” tab Settings field, click to select the Enable Graphic check
box (Figure 3 a). The
Player screen should display your Custom Graphic.
To disable Custom Graphics:
• From the “Configuration” tab Settings field, click to de-select the Enable Graphic
check box (Figure 3 a). The
Player screen will NOT display the Custom Graphic.
NOTE: See Custom Graphics to create and store a Custom Graphic
into a Sentry 2.0 unit.
Figure 3 Custom Graphic Enable/Disable Activation Setting Screen
a
Part No. 960-000159R_Rev. 1 © 2013, JCM Global, Corporation
23
April, 2013 Software Guide Sentry® 2.0 Intelligent Bezel
ERROR INDICATORS
The Sentry 2.0 displays the following error messages and icons:
• Tow Truck – Indicates to the player that a problem occurred in
the Banknote Validator. The Player is advised to
“Call Attendant”.
(This message is displayed in the “Player Mode.”)
Access the Attendant or Technician Mode(s) via the circuit
board’s Technician pushbutton, or by using the Remote Access Device, and note the
specific error message related to the “Call Attendant/Tow Truck” display.
• Ambulance – Indicates that a COMM Error has occurred.
The Validator shuts down. Communication has been lost, or
immediate attention is required.
• Key – Indicates that a Stacker error has occurred. Replace or
repair the Cash Box. (This repair requires Cash Box access.)
• Crossed Circles – Indicates that a PCB error has occurred.
A ROM Verification Error or a jammed Motor may be indicated.
A Bench Maintenance-related repair is required.
• Eye – Indicates that a possible cheat attempt has occurred. May
also indicate that multiple Banknotes have been rejected in a short
period of time. Clean the Sensor areas.
• Crossed Hammer & Wrenches – Indicates that a Banknote
jam occurred in the Head area. Minor service is required at the
Machine. When used on an iVIZION Unit, check the Unit’s
Status LEDs for specific trouble indication information.
• Armored Truck – Indicates that the Cash Box is full.
NOTE: The following messages are only displayed in the Attendant/Technician
Modes, and are not visible to the Player.