Product specifications

Sentry® 2.0 Intelligent Bezel Software Guide April, 2013

HOST COMMUNICATION

DIP Switches located on the Sentry 2.0 Bezel’s PCB are used to select the

required Communication Interface for the intended application. Available options

described below include ID-003, ID-024 (Netplex), and JPL:

ID-003 Serial Interface – Verify that DIP Switch #2 on the Controller Circuit

Board is set to the

"ON" position. With the Sentry 2.0 Bezel connected to an

iVIZION Unit, verify that the following conditions exist:

• Ticket acceptance and proper response occur

• Banknote acceptance and proper response occur

• The Sentry 2.0 Bezel is set to Attendant Mode.

• Banknote Acceptance, proper denomination reporting and Banknote Orientation are

correct for the ID-003 Interface Protocol.

ID-024 (NetPlex) Serial Interface –

Verify that DIP Switch #2 on the

Controller Circuit Board is set to the

"OFF" position. With the Sentry 2.0 Bezel

connected to an iVIZION Unit, verify that the following conditions exist:

• Ticket acceptance and proper response occur

• Banknote acceptance and proper response occur

• The Sentry 2.0 Unit is set to Attendant Mode.

• Banknote Acceptance, proper denomination reporting and Banknote Orientation are

correct for the ID-024 (NetPlex) Serial Interface Protocol.

ID-028 and ID-0G8 USB Interface –

The Sentry 2.0 Bezel connects to the JPL

- BV Serial Interface

for both the ID-028 and ID-0G8 protocols. Follow the

JPL test below to verify proper operation.

JPL - BV Serial Interface – Verify that DIP Switch #4 on the Controller

Circuit Board is set to the

"OFF" position. With the Sentry 2.0 Bezel connected

to an iVIZION Unit, verify that the following conditions exist:

• Ticket acceptance and proper response occur

• Banknote acceptance and proper response occur

• The Sentry 2.0 Unit is set to Attendant Mode.

• Banknote Acceptance, proper denomination reporting and Banknote Orientation are

correct for the JPL-BV Serial Interface Protocol.

Sentry® 2.0 Intelligent Bezel Software Guide April, 2013

NOTES