Product specifications

Sentry® 2.0 Intelligent Bezel Software Guide April, 2013

EQUIPMENT REQUIREMENTS

The following equipment and software applications are required to install and

program a Sentry 2.0 Display Module:

• Sentry 2.0 Bezel (for JCM iVIZION Unit installation only)

• JCM iVIZION Unit

• Personal Computer (Windows

, Vista

, Vista64

or Windows 7

)

• JCM ID-003 or ID-024 Basic Driver

• JCM Tool Suite Software (for JCM iVIZION Unit installations only)

• Sentry 2.0 Download and Configuration Utility Application Software

ABOUT INSTALLATION

CONFIGURATION DIP SWITCHES

As shown in Table 1, the Sentry 2.0 Controller incorporates DIP Switches to

enable several Modes: Graphics Display Orientation, Communications Protocol

Options, Banknote Animations and the JPL Protocol Line’s Resistive Termina-

tion. Use the DIP Switches located on the Sentry 2.0 PCB to select the required

LCD viewing Orientation.

Use Switch #1 to adjust the Horizontal Orientation of the LCD data.

NOTE: The JCM Driver and Software Applications listed above are

available from jcmglobal.com.

NOTE: Installation procedures are customized for each

game platform’s Bezel. For further assistance, please

contact your local JCM Sales Representative or JCM

Customer Service at (800) 683-7248.

NOTE: Change the position of Switch #1 before changing the

position of Switch #3.

NOTE: If the Text on the Display appears upside-down, Switch #1 is in

the wrong position for viewing a line of text with a horizontal attitude.

Sentry® 2.0 Intelligent Bezel Software Guide April, 2013

THIS PAGE INTENTIONALLY LEFT BLANK