Product specifications

Part No. 960-000159R_Rev. 1 © 2013, JCM Global, Corporation
16
Sentry® 2.0 Intelligent Bezel Software Guide April, 2013
SENTRY 2.0 FIRMWARE
D OWNLOADING S OFTWARE
Application Firmware
To download Sentry 2.0 Application Firmware:
1. Connect the Sentry 2.0 to a PC/Laptop using a Micro-B USB Cable between the
PC/Laptop and the Sentry 2.0 Intelligent Bezel.
2. From the PC/Laptop, launch the Sentry 2.0 PC Configuration Application.
When the Configuration Utility recognizes a successful USB connection to the
Sentry 2.0 Unit, the Status Bar at the bottom of the Sentry 2.0 Configuration
Screen displays
“Device: Connected,” as shown in Figure 11a.
.
Figure 11 SENTRY 2.0 Configuration Screen “Connected”
a
NOTE: During a Firmware Update, the Status Bar will
indicate “Device: BL Mode Connected.”
Part No. 960-000159R_Rev. 1 © 2013, JCM Global, Corporation
13
April, 2013 Software Guide Sentry® 2.0 Intelligent Bezel
TICKETS
T ICKET A CCEPTANCE
1. Insert an acceptable Ticket into the Banknote Validator.
2. When accepted, the Sentry 2.0 Display Screen should display a "
Good luck" mes-
sage in the primary Country’s Language.
R ECEIVE T ICKET A NNUNCIATOR
The Receive Ticket Annunciator Diagnostics utility is intended for use with OEM
designed Bezels. This feature is not active in Normal Bezel Operation.
1. To activate this feature from the SENTRY 2.0 Configuration Screen “Diagnostics”
tab, click the “Receive Ticket Annunciator On
” button (Figure 8 a).
2. To disable the Receive Ticket Annunciator utility from the “Diagnostics” tab, click
the “Receive Ticket Annunciator Off” button (Figure 8 b).
NOTE: The Acceptance Rate is only available for
Banknotes, not Tickets.
Figure 8 SENTRY 2.0 Receive Ticket Annunciator Diagnostics Screen
a
b
NOTE: The Receive Ticket Annunciator Diagnostics utility is
intended for an OEM Specific Sentry 2.0 Build.