Product specifications

Part No. 960-000159R_Rev. 1 © 2013, JCM Global, Corporation
10
Sentry® 2.0 Intelligent Bezel Software Guide April, 2013
S ENTRY 2.0 A CCEPTABLE B ANKNOTE S CREEN
To specify Banknote Denominations displayed for the Player on the Sentry 2.0
Display Screen, proceed as follows for the desired Communications Protocol:
ID-003
1. Click the Configuration Utility’s “Clear Denominations” button to clear all denomi-
nation selections. The Sentry 2.0 Display Screen should not display
"Insert bill,"
"Insert ticket,"
or any denominations once this is done.
2. Insert a Ticket into the Banknote Validator.
3. The Sentry 2.0 Display Screen should only display an
"Insert ticket" message.
4. Insert an accepted Banknote into the Banknote Validator.
5. The Sentry 2.0 Display Screen should display a message to
"Insert bill", and the
denominations of the Banknotes inserted. Additionally, the Currency Symbol
should be correct for the specific Country.
ID-024
1. Click the Configuration Utility’s “Clear Denominations” button to clear all denomi-
nation selections. The Sentry 2.0 should not display
"Insert bill," "Insert ticket" or
any denominations once this is done.
2. Insert a Ticket into the Banknote Validator.
3. The Sentry 2.0 Display Screen should only display an
"Insert ticket" message.
4. Insert an accepted Banknote into the Banknote Validator.
5. The Sentry 2.0 Display Screen should display a message to
"Insert bill," and all the
denominations of the Country’s currency. The Currency Symbol should also be
correct for the specific Country.
ID-028/ID-0G8
1. Click the Configuration Utility’s “Clear Denominations” button to clear all denomi-
nation selections. The Sentry 2.0 should not display
"Insert bill," "Insert ticket" or
any denominations once this is done.
2. Insert a Ticket into the Banknote Validator.
3. The Sentry 2.0 Display Screen should only display an
"Insert ticket" message.
4. Insert an accepted Banknote into the Banknote Validator.
5. The Sentry 2.0 Display Screen should display a message to
"Insert bill," and all the
denominations of the Country’s currency. The Currency Symbol should also be
correct for the specific Country.
NOTE: If the Host Machine is set to send a Banknote to an iVIZION Unit,
the accepted Banknote Denomination will be automatically preset on the
Sentry 2.0 Bezel during installation.
Part No. 960-000159R_Rev. 1 © 2013, JCM Global, Corporation
19
April, 2013 Software Guide Sentry® 2.0 Intelligent Bezel
CUSTOM GRAPHICS
To create and load a Custom Graphic into a Sentry 2.0 Unit:
1. If a Custom Graphic has not yet been created, follow the procedure on the preced-
ing page to create a 240 x 64 Pixel Monochrome .bmp Graphic.
2. Download the valid custom graphic into the Sentry 2.0 Unit. To do so, select the
Download Tab on the Sentry 2.0 Utility Screen (Figure 13 a).
3. From the Update SENTRY 2.0 Graphic field (Figure 13 b), click the
Select File
button (Figure 13 c). Browse the PC for the folder where the custom “.bmp format
graphic”
was saved, then click to select it.
4. Once selected, the Custom Graphic appears in the
Preview window (Figure 13 d).
The file name appears in place of
“Preview.”
5. When the new Graphic appears, click the
Update button (Figure 13 e) to write the
Custom Customer’s Graphic into the Sentry 2.0 Memory. The Custom Graphic’s
Download Status and Progress (percentage) are displayed as the download
progresses from 0% to 100% (Figure 13 f).
6. Verify that the Custom Graphic is properly loaded into the Sentry 2.0 Unit.
To do so, power the Unit off and on, and verify that the new Custom Graphic
is displayed.
Figure 13 SENTRY 2.0 Update Graphic Download Screen
a
b
c
e
d
f