Operator`s manual

VirTis BenchTop 2K, 4K and 6K Sentry 2.0 Controls

Revision 004, 12/09 13

LCD Display Functions

By default, the LCD display shows the system Synoptic screen. The Synoptic screen

gives a visual representation of the current operation and status of the unit. Alarm

messages, run time and system status are displayed.

Note: The actual synoptic screen may vary slightly from the illustration above.

ain Menu

essing the MENU button while on the Synoptic screen displays the Main Menu. If

∧ Main Menu

the unit goes idle (no input after three minutes), the system will default back to the

Synoptic screen.

User Options >

Alarms >

Setpoints >

Vacuum Control 0000

Purge Off

Bath Off

Heat Off

Note: Tem are disabled except when the Synoptic

avigation within the menu screens is accomplished using the Up/Down (+/-) arrow

perature and vacuum control functions

screen is displayed. Bath and Heat functions are not available simultaneously.

buttons in conjunction with the MENU button. The Up/Down (+/-) buttons allow you to

scroll the cursor to the desired function and allows the value of a setpoint to be

changed. The MENU button is used to select the desired item.