Operating instructions
28 Ramp-Hold
Appendix D:
Sentry Ramp-Hold Shorthand Instructions
After you press the keys in the left column, the message to the right will appear.
KEYS TO PRESS DISPLAY COMMENTS
PROGRAM AND FIRE THE KILN.
Apply power to kiln Press Enter if IdLE does not appear.
4 Enter program number.
A number from 1 to 9 Program number appears.
ENTER Enter rate of segment 1.
Rate Rate appears.
ENTER Enter temperature of segment 1.
Temperature Temperature appears.
ENTER Enter hold time.
Hold time (0 if none) Hold time appears.
Repeat for other segments. Enter rate of 0 for 1st segment not needed.
ENTER The kiln is ready to fire.
ENTER Kiln is now firing.
SELECT AND FIRE A STORED USER PROGRAM.
Apply power to kiln Press Enter if IdLE does not appear.
4 Select a program number.
A number from 1 to 9 Displays the number you selected.
ENTER
STOP, STOP Selected program is ready to fire.
ENTER
The kiln is now firing. Press 6 for Program Review.