Specifications

Version 17
Page 9
888-881-1602
203-881-1649
www.AltHeatSupply.com
Phone
Fax
Online
THREE WAYS TO ORDER
SDKitComplete Complete Shaver Damper Kit This is a great kit to Up-
grade your Shaver Wood Furnace. And we’ve done most of the work for
you!! Everything comes already assembled and is very simple to use. You
will have the ability to set the water temperature and differential anywhere
you like depending on the season. This kit includes: An Upgraded Fan
1TDP3, Laminated Solenoid LS001, Laminated Solenoid Bracket, Blower Wire
Jumper, Fan Cover FC546, Fan Cover Spring, Digital Aquastat AQ007, Stain-
less Steel Dry Well DW1204, a How to install Diagram and a Wiring Diagram.
$274.99
SDKitAQ Shaver Auto Damper Kit with Digital Aquastat Like the kit
above plus you will have a lot more control of your Wood Furnace with the
assistance of the Digital Aquastat. You will have the ability to set the water
temperature and differential anywhere you like depending on the season.
This kit only works with Shaver Wood Furnace with 1TDP3 fan! If
your Shaver Wood Furnace has the 1TDN7 fan, you will need to get
the 1TDP3 fan or SDKitComplete. This kit includes: Laminated Solenoid
LS001, Laminated Solenoid Bracket, Blower Wire Jumper, Fan Cover FC546,
Fan Cover Spring, Digital Aquastat AQ007, Stainless Steel Dry Well DW1204,
Diagram How to install, Wiring Diagram. **Fan is not Included in this
Kit**
$189.99
SDKit ShaveSDKit Shaver Auto Damper Kit This is a great kit to Upgrade
your Shaver Wood Furnace. Your Shaver will smoke less during idle, burn
hotter and cleaner. Will reduce the amount of wood being burned as well. To
Install this kit it should take about an hour with a handful of tools. This kit
only works with Shaver Wood Furnace with 1TDP3 fan! If your Shav-
er Wood Furnace has the 1TDN7 fan, you will need to get the 1TDP3
fan or the SDKitComlete. This kit includes: Laminated Solenoid LS001,
Laminated Solenoid Bracket, Blower Wire Jumper, Fan Cover FC546, Fan
Cover Spring, and a How to install Diagram. **Fan is not Included in this
Kit**
$99.99
Free
Shipping
DIYKitComplete, Build Your Own Wood Boiler or Furnace This kit
includes all that you see in the picture, as well as a Wiring Diagram to
assist you in the setup and install of the kit. The Kit Includes: AQ007
Ranco Digital Controller (Which controls the Water Temp of your Boiler),
DW1204 Stainless Dry well for Ranco controller (This holds the Temp
Prob. of the Digital controller), 4C446 Dayton Blower (FN446) (The fan /
Blower that feeds your boiler with air with 148CFM), FC546 Fan Cover for
Dayton Fan (This cover prevents air entering your boiler when idling to
prevent overheating and excessively smoking), LS001 Laminated Sole-
noid to lift fan cover (This Solenoid lifts the fan cover when the Fan/
Blower is activated), Solenoid Bracket (Holds Solenoid), Fan Blower Wire
(Wire from solenoid to Blower / Fan). The Dimensions: 12 3/4" Height
and 6 1/2" wide (This is the Measurement of the Kit Completely assem-
bled). Volts: 115 V (All you need is to provide electricity to your Boiler).
** Comes assembled.
$274.99
DIYKitAQ Auto Damper Kit with Digital Aquastat This kit includes all
of the parts listed above EXCEPT the fan. It does not come assembled.
$189.99
DIYKit Auto Damper Kit This kit includes all of the parts listed above
EXCEPT the fan, Aquastat or Stainless Steel Drywell. It does not come
assembled.
$99.99
The above kits will work with: FN446, FN004, FN1TDP7, FNA166
Free
Shipping