Specifications

Version 17
Page 7
888-881-1602
203-881-1649
www.AltHeatSupply.com
Phone
Fax
Online
THREE WAYS TO ORDER
ETC Assembly - Wood Master ETC Panel New. This is a Brand New ETC Panel
that is used with the Wood Master 3300, 4400, 5500 and 6500 Models. Extreme-
ly easy to Install with the quick connect. Comes pre-programmed.
$249.99
Reconditioned ETC Assembly - Some times settings reset or there is water
damage or it just stops working. So we simply repair and reprogram the control
panel. Simply take off your bad one and put this into place. We will need your
old one back, so we can repair and pass on the savings to the next person. If
you want to keep your old panel you will need to buy a new ETC panel at full
price. The panels are fully tested and work as they should.
$159.99
+ $60.00
Core Charge
ETC Shield & UV Protection - Help protect the ETC panel from water and sun
damage.
$35.99
ETC Black Box - This is installed behind the ETC panel and protects all of the
internal wiring of the boiler.
$20.23
WMAQ004—The WoodMaster Aquastat/temperature gauge. Controls wood boil-
er temperatures. Is preset to WoodMaster specifications. This is a Direct Re-
placement for WoodMaster. (XR30CX)
$121.99
LSW101 Light ON/OFF Switch - To replace on the ETC Assembly
$9.57
FS101 Fan ON/OFF Switch - To replace on the ETC Assembly
$7.25
WL302 Green LED Light Assembly - For water level light. LED light for long
life.
$29.99
WL001 Float Assembly - For water level light. Used on Wood Master wood
furnaces.
$89.99
AQ305 Thermistor Wire - For digital aquastat. (3” stainless steel probe & 6 ft
wire) Fixes P1 issue.
$11.96
Complete Front Door Assembly - Designed to be air cooled. Includes fan
(FN446), fan cover (FC546), laminated solenoid (LS001), draft spring (DS001),
blower wire (FBW001), and 1” fire rope (cut to fit. Simple mounting (hinge).
4400 = 24” x 24” 5500 = 27” x 27”
Great door for the DIY Guy building their own outdoor furnace.
*** THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING ***
FD4400
$475.00
FD5500
$499.00
Complete Auger & Grate Assembly - An ash auger can be added to the 4400
or 5500 models only. This is a complete auger kit, everything you will need. In-
stall is simple. Made with 1/4 mild steel, in the USA.
Includes Auger Grate, Auger Assembly, Auger Extractor, Auger Trap Door and
Auger Handle.
*** THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING ***
AK4400
$525.00
AK5500
$550.00
Complete Wiring Harness - Used in the 4400 and 5500 models. Wires are
simply labeled and can be easily installed in a couple hours. There is a quick con-
nect included to hookup to an ETC Assembly. A Direct Replacement from Wood-
Master.
WH4400
$49.61
WH5500
$71.21
FREIGHT
ONLY