Specifications

Version 17
Page 6
Shop online www.AltHeatSupply.com and Save!
Free Shipping on MOST Orders of $250.00 or more
(Alaska, Hawaii and Canada not included)
ORDER BY 3PM EST MONDAY THRU FRIDAY
FOR SAME DAY SHIPPING
SD001
Snap Disc - Snap Disc Control, Limit, Automatic Reset, Switch Action Open on Rise,
Switch Type SPST, Temp. Range (F) 150 to 190, Differential 40, Inductive Amps @
120V 10, Inductive Amps @ 240V 5, Pilot Duty Contacts (VA) 125, Resistive Amps @
120V 25, Resistive Rating 240V 25, Voltage Range 120 to 277, Switch Closes @(F)
150, Switch Opens @(F) 190
$10.87
SD005
Snap Disc - Snap Disc Control, Adjustable Limit, Automatic Reset, Switch Action Open
on Rise, Switch Type SPST, Temp. Range (F) 135 to 215, Differential 40, Inductive
Amps @ 120V 14, Inductive Amps @ 240V 10, Pilot Duty Contacts (VA) 125, Resistive
Amps @ 120V 25, Resistive Rating 240V 25, Voltage Range 120 to 240, Switch Closes
@ (F) 135 to 175, Switch Opens @ (F) 175 to 215
$16.99
LS001
Laminated Solenoid - Current @ max stroke 4.90 Amps, coil resistance 20.5 Ohms,
coil voltage rating @ 60 HZ 120 VAC, seated current 0.43 Amps, seated power 17.9
Watts, mounting holes on center length 2 in, mounting holes on center width 1 3/8 in,
length 2 1/2 in, depth 2 1/16 in, width 1 13/16 in. The LS001 is the most common
laminated solenoid used in the industry. Grainger Part # 4X240, Dormeyer 2005-M-1,
Guardian 18-C-120
$25.79
LSC01
Laminated Solenoid - Current @ maximum stroke 6.50 Amps, coil resistance 14.9
Ohms, coil voltage rating @ 60 HZ 120 VAC, seated current 0.48 Amps, seated power
19 Watts, mounting holes on center length 2 in, mounting holes on center width 1 5/8
in, length 2 1/2 in, depth 2 1/16 in, width 2 1/16 in. Grainger Part # 4X241, Dormey-
er 2536-M-1
$39.78
LS002
Laminated Solenoid - Current @ maximum stroke 1.25 Amps, coil resistance 88.0
Ohms, coil voltage rating @ 60 HZ 120 VAC, seated current 0.24 Amps, seated power
9.5 Watts, mounting holes on center length 1 3/8 in, mounting holes on center width
5 7/8 in, length 1 5/8 in, depth 1 7/16 in, width 1 3/16 in. Grainger Part # 4X239,
Dormeyer 1000-M-1, Guardian 16-C-120
$19.69
LS242
Laminated Solenoid - Current @ Max Stroke 12.0 Amps, Coil Resistance 6.5 Ohms,
Coil Voltage Rating @ 60 hz 120 VAC, Seated Current 0.66 Ampere, Seated Power 25
Watts, Mounting Holes On Center Length 2 Inches, Mounting Holes On Center Width 1
7/8 Inches, Length 3 Inches, Depth 2 15/16 Inches, Width 2 3/8 Inches Dormeyer
3000-M-1
$43.99
FR001
FR012
Fiberglass Braided Rope - To seal the doors and any other gaps which let in air.
Handles well over 1000 degrees F. We recommend hi-heat 100% silicon to hold the
rope in the door.
FR001 is 1” round thick high quality rope. Sold by the foot.
*** 1” Rope by the Box (250 feet) = $325.00 (SAVE $50) ***
FR012 is 1/2” wide and 1/16” thick, braided. Sold by the foot.
$1.50 per ft.
$.35 per ft.
Silicone
High Temp Silicone - 10 oz tube, can be used to seal wood boiler chimneys and
doors. Can also be used to install Fire Rope.
$6.99
VC301
Vent Cap - For all wood stoves, 2 1/2” Diameter, helps prevent water evaporation &
debris.
$12.99
DH101
Door Handle - Insulated Handle for most wood stoves.
$9.25
SRH101
Slide Rod Handle - Insulated Handle for most wood stoves.
$12.52
SB001
Bracket Square - To connect the laminated solenoid to your rubber flapper on a fan/
blower that has a SQUARE shoot (FN446, FN004, FN1TDP7, FNA166)
$17.99
SB001s
Bracket Round - To connect the laminated solenoid to your rubber flapper on a fan/
blower that has a ROUND shoot (FN1TDP3, FN1TDN7)
$19.99
FC546
Fan Cover - Is used to cover the blower to stop air from entering wood boilers. It is
used on all WoodMaster Wood Furnaces. It is made from a high quality rubber which
will last several years and it’s backed by 20 gauge galvanized steel. Excellent option
for all wood boilers.
$14.99
FBW001
Fan Blower Wire - Used to connect the fan to the laminated solenoid. 20” length
with a spade connector and protective sheathing. 14AWG. Heat rated 220 F. Water
Resistant.
$6.99
DS001
Draft Spring—DIY - This is the draft spring used in our DIY Kits as well as on all
WoodMaster furnaces.
$3.46
DS002
Draft Spring—Shaver - This is the draft spring used in our Shaver Damper Kits.
$3.46