Specifications

Version 17
Page 3
888-881-1602
203-881-1649
www.AltHeatSupply.com
Phone
Fax
Online
THREE WAYS TO ORDER
FN446 Dayton 4C446 (6FHX8) - Shaded pole blower, air flow @ 0.000 inch static
pressure 148 CFM, speed 3160 , Voltage rating 115 VAC, current rating 1.37 Amps, fre-
quency 60/50 HZ, thermal protection auto, wheel diameter 3 13/16 In, wheel width 2
1/2 In, inlet diameter 3 1/8 In, air flow @ 0.100 In static pressure 141 CFM. This is
probably the most used blower in the outdoor wood furnace industry. Brands that use:
Legend, Woodmaster, Ozark, Heat Source, Heatmor, Hawken Energy, Freedom Out-
door—Eliminator 48”, HeatMaster & Pacific Western.
$89.99
FN004 Fasco No. 70213484 - Shaded pole blower, air flow @ 0.000 inch static pres-
sure 76 CFM, speed 2880 , Voltage rating 115 VAC, current rating 0.53 Amp, frequency
60/50 HZ, thermal protection auto, wheel diameter 3 inches, wheel width 1 7/8 In, Inlet
diameter 2 5/8 In, air flow @ 0.100 inch static pressure 70 CFM. Brands that use: Wood-
Master & Heatmor. Replacement for the Dayton #4C004. Smallest fan we sell!
$89.99
FN1TDP3 Dayton 1TDP3 - PSC blower, forward curve, direct drive, wheel dia 3 15/16
In, CFM 71. 0.000-In SP 75, 115 VAC, 60 HZ, single phase, full load Amps 0.45, RPM
3016, Max inlet temp 104° F, overall height 5 3/4 In, overall width 6 1/4 In, overall
depth 6 7/16 In, includes discharge mounting flange. Brands that use: John Jr. Johnson,
Taylor, Mahoning and Shaver. Direct replacement for the Dayton #4C443.
$69.99
FN1TDN7 Dayton 1TDN7 - PSC blower, forward curve, direct drive, wheel dia 3 in,
CFM 50, 0.000-in SP 50, Voltage 115, 60 HZ, single phase, full load Amps 0.23, RPM
3036, Max inlet Temp 104° F, overall height 5 13/16 In, overall width 5 1/8 In, overall
depth 6 7/16 In, includes discharge mounting flange and inlet cover. Brands that use:
John Jr. Johnson and Shaver.
$62.99
FNA166 Fasco A166 702111307 - Direct drive, CFM 145, Amps 1.5—1.37, 115v.
50 /60HZ. RPM 3160 single speed, sleeve bearing, thermally protected, shaded pole,
wheel 3-3/4 x 2-1/2 In, includes discharge mounting flange. Brands that use: Central
Boiler E-Classic 2400, 2300 models 702110411
$89.99
FN700787 Fasco No. 70731455 or 70631543- 115 VAC, 1.0 Amps, 60 HZ. CFM 160,
1500 RPM, includes discharge mounting flange. Empyre 250 & 450 and Cozeburn 250 &
450
FN800789 Fasco No. 702112231 - 115 VAC, 1.5 Amps, 60 HZ. CFM 122, 3000 RPM,
includes discharge mounting flange. Aspen 175 or Pro Series 200/400, Empyre ET, XT
200 & 650, Cozeburn 650, Elite-Indoor 100/200.
FN900789 Fasco No. 70625938 - 115 VAC, 1.8 Amps, 50/60 HZ. CFM 270, 3200
RPM, includes discharge mounting flange. Aspen or Pro Series 400. Biggest fan we sell!
*** WE CARRY THE ASPEN FAN COVERS (FC814428) - $39.99 ***
$127.99
$157.99
$187.99
FN1TDP7 Dayton 1TDP7 - PSC blower, forward curve, direct drive, wheel dia 3 15/16
In, CFM @ 0.000-In SP 146, 115 VAC, 60 HZ, single phase, full load Amps 0.75, RPM
3100, Max inlet temp 104° F, overall height 5 3/4 In, overall width 6 5/16 In, overall
depth 5 3/8 In, includes discharge mounting flange. Brands that use: Legend, Woodmas-
ter 4400 & 5500, Ozark, Heat Source, Heatmor 200 css & 400 css, Hawken Energy,
HeatMaster & Pacific Western. Direct replacement for the Dayton #4C446.
$84.99
FN1TDR3 Dayton 1TDR3 - PSC blower, forward curve, direct drive, wheel dia 5 1/8 in,
CFM @ 0.000-In SP 273, 115 VAC, 60 HZ, single phase, full load Amps 0.77, RPM 1640,
Max inlet temp 104° F, overall height 9 7/8 In, overall width 7 11/16 In, overall depth 8
7/8 In, includes discharge mounting flange. Brands that use: Taylor, HeatSource & Free-
dom. Direct replacement for the Dayton #4C447.
$99.99
FN1TDP1 Dayton 1TDP1 - PSC blower, forward curve, direct drive, wheel dia 3 In.,
CFM @ 0.000-In SP 89, 115 VAC, 60 HZ, single phase, full load amps 0.31, RPM 3010,
Max inlet temp 104° F, overall height 5 3/4 In, overall width 5 3/8 In, overall depth 5
3/8 In, includes discharge mounting flange. Brands that use: WoodMaster 5500 (rear
fan) & Heatmor 100 css and Coyote. Direct replacement for the Dayton #4C004.
$64.99
FN1TDP5 Dayton 1TDP5 - PSC blower, forward curve, direct drive, wheel dia 3 3/4
In., CFM @ 0.000-In SP 131, 115 VAC, 60 HZ, single phase, full load amps 0.65, RPM
2860, Max inlet temp 104° F, overall height 6 11/16 In, overall width 5 5/8 In, overall
depth 6 9/16 In, includes discharge mounting flange. Brands that use: Aquatherm Eco-1
$74.99
Best
Seller
Best
Seller
NEW
ITEM