Specifications

Version 17
Page 23
888-881-1602
203-881-1649
www.AltHeatSupply.com
Phone
Fax
Online
THREE WAYS TO ORDER
PCT0138 & PCT1234 Mini Crimp Tool - That gets the job done. By tighten-
ing the 2 bolts. This tool is excellent to be accompanied by the larger crimp tool for
those hard to reach areas. See Page 17 for quantity discounts.
PCT0138 Crimp 1” & 3/8” rings PCT1234 Crimp 1/2” & 3/4” rings
$29.99
PKK01 Kwik Cut - Model T100. Cuts up to 1” polyethylene pipe rubber hose, Pex
or PVC. Replaceable blade, clean cut every time. Every tool box should have this tool!
$15.92
TLkit0138 or TLkit1234 Tool Kit - This kit includes two tools which make
your job easy at a cost you can afford. Kwik Cut Pex or hose cutter and compact crimp-
ing tool. When ordering please identify (PCT0138) 1” & 3/8” or (PCT1234) 3/4” & 1/2”
$45.91
PCTL01 PEX Crimp Hand Tool - Includes crimp tool, jaws for 3/8", 1/2", 3/4"
and 1" size crimp rings and SharkBite® barb fittings. And a go-no-go gauge, adjust-
ment tools and case. (23100) See Page 17 for quantity discounts.
$249.99
PCTL34 PEX Crimp Tool - This Pex crimp hand tool allows for a complete full-
circle crimp with longer handles to provide more leverage, requiring less force to com-
plete a crimp connection. This tool makes use of copper crimp rings. See Page 17 for
quantity discounts.
$79.99
PCT02 & PCT03 Pex Clamp Tool - Pex clamp tools are designed to mechani-
cally crimp 3/8" to 1" stainless steel clamps as required for Pex installations. The three
handle version is easier to use with smaller hands and ratchets down. These tools only
work with stainless steel clamps. (PCT02 is the two handle version)
PCT02 $79.99
PCT03 $199.99
SCR12, SCR34 & SCR01 Stainless Steel Clamp Rings - All size clamp
rings use only one tool (PCT02 or PCT03) to save on cost of multiple tools.
(SCR12 = 1/2”, SCR34 = 3/4” and SCR01 = 1”) Take 10% off for bags of 100
SCR12 $.26
SCR34 $.36
SCR01 $.48
SBCKit The Cash Acme SharkBite® Kit- SharkBite® push-fit fittings are the
fastest, easiest way to join copper, CTS, CPVC and PEX pipe in any combination. With no
soldering, clamps, unions or glue. Certified to 200 psi and 200°F (93°C). (Kit includes 2
each: SBC1212, SBC3434, SBC3412, SBF12, SBF34, SBM12, SBM34, SB912 and SB934.
Includes 1 each: SBT12, SBT34, SBS12, SBS34, SBDC12, SBDC01, SBDC34, and SBDT34)
Reg. $229.99
$199.99
MVH34S & MVH01S Cash Acme HeatGuard® 110-HX Mixing Valve
Increased outlet temperature range extending to 176° F (80° C), making it ideal for applica-
tions in heating systems. It can be used in any application that requires the delivery of con-
trolled or reduced temperature hot water. Excellent for small radiant applications due to a
higher GPM. Not recommended for domestic water use due to higher temperature range.
MVH34S
3/4” Swt $99.63
MVH01S
1” Swt $119.44
MV34S & MV01S Cash Acme HeatGuard® 110-D Mixing Valve
Sweat intended for installation at the water heater to distribute controlled temperature water
through a domestic hot water system. The valve delivers water at a maximum of 120° F (49°
C), allowing the heater to be set at 140° F (60°C) or higher, thus providing a greater effective
volume of hot water and reducing the chances of Legionellae bacteria growth in the water.
MV34S
3/4” Swt $85.65
MV01S
1” Swt $89.93
MV34SB Cash Acme HeatGuard® 110-D Mixing Valve (SharkBite® Ends)
SharkBite® ends for installation at the water heater to distribute controlled temperature water
through a domestic hot water system. The valve delivers water at a maximum of 120° F (49°
C), allowing the heater to be set at 140° F (60° C) or higher, thus providing a greater effective
volume of hot water and reducing the chances of Legionellae bacteria growth in the water.
3/4” SB $79.99
No sweat or
threading
MV11501 Cash Acme HeatGuard® 115-H Mixing Valve
The Heatguard® 115-H has an outlet temperature range extending to 140° F (60° C) and a
flow rate of 30 GPM at 45 PSI, making it ideal for application in large heating systems. It also
has applications in any installations requiring the delivery of reduced temperature hot water.
Used for radiant floor applications.
1” NPT $199.99
Part Description Price
Part Description Price
Best
Seller
Best
Seller
Sale