Specifications

Version 17
Page 10
Shop online www.AltHeatSupply.com and Save!
Free Shipping on MOST Orders of $250.00 or more
(Alaska, Hawaii and Canada not included)
ORDER BY 3PM EST MONDAY THRU FRIDAY
FOR SAME DAY SHIPPING
AQ001 Well Immersion Control - L6006A 1012, contact current rating @ 120
VAC 8 Amps, contact current rating @ 240 Vac 5.1 Amps, differential 5-30° F,
switch action SPDT, temperature setting range 100-240° F, height 5 3/8 in,
width 2 in, depth 2 1/8 in (immersion well included). This aqua-stat is used to
control most older wood boilers. The drywell has a 1/2” thread.
$133.99
AQ003 Hot Water Control Strap On Aqua Stat - Honeywell L6006c 1018,
contact current rating @ 120 VAC 8 Amps, contact current rating @ 240 VAC
5.1 Amps, differential 5-30° F adjustable, switch action SPDT, temp. setting
range 65-200° F, open/close on temperature rise. Used to communicate with
wood boilers and hot air systems. Manually adjustable.
$74.86
AQ008 Well Immersion Control - Honeywell L4006E 1091, breaks on rise.
High limit; Manual reset aqua-stat controller with 130° F to 270° F operating
temperature, 250 Stop, manual reset, 3" insulation, less well, full electrical load:
240 VAC; 2.6A @ 120 VAC, case dimensions (in.) 5 5/8 in. high x 2 in. wide x 2
1/8 in. deep.
$99.98
AQL4006A - Honeywell L4006A 1678, 100° F to 240° F operating temperature
and 5° F to 30° F adj. differential has 3" capillary. Immersion well not included.
Breaks the circuit on a temperature rise to the control setting. Used for high
limit or low limit control. Stop factory set at 240° F. A setting stop is included to
prevent setting above a desired temperature on limit.
$99.99
IW1203 & IW3403 Copper Immersion Well - 1/2” or 3/4” MPT, bulb Dia.
3/8”, max insertion/bulb length 3”, insulation depth 1”, accessory for controls,
includes mounting clamp.
IW1203
1/2” $14.99
IW3403
3/4” $14.99
AQ002 Ranco ETC - 112000-000 Electronic temperature control single stage
sensor, range –30° F to + 220° F, differential of 1° F to 30° F, power 24 VAC.
class 2, output SPDT relay. Commonly used for heating pools, spas, solar appli-
cations & much more.
$59.99
AQ007 Ranco ETC - 111000 is a microprocessor based temperature controller,
suitable for switching 120 VAC, up to 16 Amps for heating or cooling applica-
tions making it suitable for a wide range of applications. Temperature set point
range: -30° F to 220° F, Differential range: 1° F to 30°F, Input Voltage: 120
VAC, Sensor: Thermistor, 2" long x 1/4" dia with 8' cable (included) normally
open (NO): 16 Amps @120 VAC normally closed (NC): 8 Amps @120 VAC. Ex-
cellent upgrade for wood boilers with simple aqua-stats. This is used to control
the fan on an Outdoor Furnace.
$64.95
DW12 Stainless Steel Dry Well - Most commonly used with pools and spas.
Mounted in a tee in the water stream and probe mounted inside to monitor pool
or spa temperature. Total length 3”, 1/2” MNPT, 1 3/4” probe length.
DW1204 Stainless Steel Dry Well - Is the same as DW12 but is a total length
of 4”, 1/2” MNPT, 2 3/4” probe length.
** These drywells work with AQ002 & AQ007 **
DW12 $17.73
DW1204 $17.99
AQ004 Dixell Controller XR30CX - Aquastat/temperature gauge. Controls
wood boiler temperatures. Has only 1 probe input.
AQ004AC Dixell Controller XR30CX - Aquastat/temperature gauge. Controls
refrigeration systems. Has only 1 probe input.
$99.99
AQ044 Dixell Controller XR40CX - Aquastat/temperature gauge. Controls
wood boiler temperatures. Has 2 probe inputs.
AQ044AC Dixell Controller XR40CX - Aquastat/temperature gauge. Controls
refrigeration systems. Has 2 probe inputs.
$99.99
Best
Sellers