Specifications

ManualsBrandsSentry ManualsBusiness equipmentPR100

Michigan 800-522-2940 • North Carolina 800-768-6050 • Texas 877-347-5117

ADAMS RITE

8650

4015 Threshold Bolt

Adding the 4015 Threshold Bolt to a pivoted bolt MS deadlock allows maximum se-

curity for pairs of doors by the turn of a single key. The two-point lock secures the

entire double door entrance.

Item Description

4015-18-A Zinc

Additional cost for cylinder height over 53”

4085 Header Bolt

4085 was designed to add a top-of-door third locking point for pairs of doors with

a MS pivoted bolt deadlock and 4015 threshold bolt in the active leaf. It saves the

keyholder from the difficulty of lining up the doors with three separate strikes.

Item Description

4085-01-IB Up to 7’ Door Height, Inactive Leaf

4085-02-IB 7’1” - 10” Door Height, Inactive Leaf

4089 Exit Indicator

Provides unmistakable notification to building occupants of an exit’s “locked” or

“open” condition. Includes permanently adhesive header sign that reads “This Door

Must Remain Unlocked During Business Hours”.

Item Description

4089-01-A Exit indicator and Sign, Satin Aluminum

4089-01-B Exit indicator and Sign, Bronze

MS4043 Cylinder Guard

MS4043 offers superior protection against burglary. It is made with a heavy steel

plate making unwanted entry impossible.

Item Description

MS4043-00-A 1/8” Stile Wall, 5 or 6 Pin, Aluminum

MS4043-00-B 1/8” Stile Wall, 5 or 6 Pin, Dark Bronze

4901 & 4902 Series Deadlatch Strikes

Designed for use in conjunction with 4300, 4500, 4700 or 4900 Series deadlatches,

these strikes offer a choice of mounting methods: a back-up mounting plate is in-

cluded to allow installation flush in a hollow section jamb. All strikes are unhanded

and include stainless steel finish plate and molded black plastic dust box.

Item Description Finish

4901-01-A Long Type Strike, Flat, With Dust Box/Mounting Plate 630

4901-01-B Long Type Strike, Flat, With Dust Box/Mounting Plate 313

4901-02-A Long Type Strike, Radiussed, With Dust Box/Mounting Plate 630

4901-02-B Long Type Strike, Radiussed, With Dust Box/Mounting Plate 313

4902-01-A Short Type Strike, Flat, With Dust Box/Mounting Plate 630

4902-01-B Short Type Strike, Flat, With Dust Box/Mounting Plate 313

4902-02-A Short Type Strike, Radiussed, With Dust Box/Mounting Plate 630

4902-02-B Short Type Strike, Radiussed, With Dust Box/Mounting Plate 313

MS1880

4015

MS4043

4085

4089

1870

1877

MS BOLT ACCESSORIES

8650 Escutcheon

Required to mount any standard mortise cylinder on concealed rod exit devices.

Item Description Finish

8650-A Escutcheon Aluminum

8650-B Escutcheon Bronze

1870 Cylinder Operated Flushbolt Series

Designed for use instead of conventional flip-lever operated flushbolts, the 1870

gives building management key control of the inactive leaf of paired doors. Rec-

ommended for installation at both top and bottom of inactive door with MS1851A

in active door for greatest security. Use 1877-A for wood doors.

Item Description Faceplate Finish

1870-30-A 1-1/8” Backset Flat Aluminum

1870-30-B 1-1/8” Backset Flat Dark Bronze

1877-A 1-1/4” Backset Flat Aluminum

MS1880 Two Way Bolt with Indicator

The MS1880 bolt offers greater convenience: one operation instead of two. An alu-

minum-letters-on-red indicator notifies occupants that the door is locked. Operated

in conjunction with any pivoted bolt MS deadlock. MS cannot be unlocked when

pivoted bolt is in locked position.

Item Description Finish

MS1880 Hourglass, Two Guides Chrome

For cylinder height over 53” and/or door height an additional fee applies.

Indicate cylinder and door height.

4901

4902

Replaces

4501 & 4502

Deadbolt Strikes

4000 Trim Strike is a simple strike plate that can be surface mounted on a wood

or metal jamb or mortised flush. Furnished with wood and machine screws.

4001 Box Strike has the same trim plate as the 4000 but with dust box added. Cus-

tomarily used only for wood construction where the dust box prevents chips, saw-

dust and other debris from entering the strike. Furnished with wood and machine

screws. MS4002 Armored Strike has the same trim plate as 4000 and 4001, but

backed up by a massive steel doubler designed to prevent the method of forced

entry known as “jamb peeling.” Fits within aluminum or other hollow jamb sections

with trim face flush, the steel completely hidden. Available flat or radiused, for pairs

of doors (can be used with two-point and three-point MS locks), and to fit all MS

deadbolts including the hookbolt version in sliding doors.

Item Description

4000 Series Trim Strike Satin AL, Bronze or Black Anodized

4001 Series Trim & Box Strike

MS4002 Armored Trim Strike

4036 & 4066 Cylinders

4036 mortise cylinder is designed to operate any Adams Rite lock or latch requiring

a mortise cylinder.

4066 mortise thumbturn can be used without keys to operate latch or lock.

Item Description Finish

4036-A Mortise Cylinder Aluminum

4066-A 1” Mortise Thumbturn Aluminum

4036

MS4002

4000

4001