Specifications

ManualsBrandsSentry ManualsBusiness equipmentPR100

ADAMS RITE

WWW.JLMWHOLESALE.COM

MS1861

1830 Bottom Rail Deadlock

For bottom rail locking of ultra-narrow stile or tempered glass doors whose bottom

rail (shoe) is too shallow for the MS1861. Mechanism is that of the MS1850A Dead-

bolt, but with the bolt size reduced. This keeps the threshold strike opening to a

minimum, avoiding collection of debris or snagging heeled shoes. Armor faceplate

protects cylinder setscrews from tampering and keeps them from loosening.

Item Description Finish

1830-02 31/32” Cylinder Height, 1-5/8” Depth AL

1830-03 1-1/8” Cylinder Height, 1-25/32” Depth AL

4006-A Optional Strike for 1830 AL

MS1861 Bottom Rail Deadlock

Using the same over center/pivot locking mechanism as the basic MS deadbolt, the

MS1861 lies horizontally in the bottom rail of ultra-narrow stile doors, which have

insufficient vertical space for a lock and tempered glass doors, which have no stile

at all. The hardened steel cylindrical bolts allow simple drilled strike holes of a rel-

atively small size to minimize the nuisance and danger presented by some threshold

strikes in collecting debris and catching women’s heels.

Item Description Finish

MS1861-01 One-point Deadlock, Vertical Bolt Only Zinc

MS1861-02 Two-point Deadlock, Vertical & Horizontal Bolts Zinc

3090 eForce-150 Keyless Entry by Adams Rite

A battery-operated keyless entry control for Adams Rite deabolts, deadlatches and

exit devices that are compatible with aluminum stile, steel and wood door applica-

tions. The device can accommodate up to 150 users, plus two one-time codes. Can

operate in three modes: Standard, Passage and Lockout. All programming is ac-

complished via the keypad. Device operation is confirmed by both a visual LED light

indicator and an audible sound generated by a piezo horn.

Item Description Finish

MS3090-01 For AR Latchlocks/Deadbolts 626

MS3090-02 For AR MS Locks & Hookbolts 626

1830

4006

Patented

non-handed

latchbolt!

4300 eLatch

The 4300 eLatch combines mechanical locking hardware with electrified access con-

trol while working within standard aluminum entrance door preparations. Always

operable from the inside via handle or paddle device. Entry via keyed mortise cylin-

der or access control element. Fail-secure lock with optional form “C” latch status

monitor. The standard 4300 operates on 12, 16 or 24 volt DC power, and is rated for

continuous duty. Units are equipped with a quick connect plug-in type connector.

Interchangeable without stile modification for MS® Deadbolts or 4500/4900 Dead-

latches. Both flat and radiused faceplates are supplied. 313 finish is dark bronze

anodized and 628 finish is clear anodized.

Item Backset Strike/Strike Shape/Lip Length Finish

4300-20-101-313 31/32” Surface/Flat/Standard Jamb DB

4300-20-101-628 31/32” Surface/Flat/Standard Jamb AL

4300-30-101-313 1-1/8” Surface/Flat/Standard Jamb DB

4300-30-101-628 1-1/8” Surface/Flat/Standard Jamb AL

4300-40-101-313 1-1/2” Surface/Flat/Standard Jamb DB

4300-40-101-628 1-1/2” Surface/Flat/Standard Jamb AL

MS3090

MS1850S

MS+1890

MS1850S Maximum Security Deadlock

For maximum security on your door you can’t go wrong with an Adams Rite MS Se-

ries lock designed for aluminum, steel and wood doors. You can lock your door at

1, 2 or 3 points along the edge of the door and frame.

Item Faceplate Backset Finish

MS1850S-310-A 1” x 6-7/8” Flat 1-1/8” AL

MS1850S-310-B 1” x 6-7/8” Flat 1-1/8” DB

MS1851S-310-A 1” x 6-7/8” Radius 1-1/8” AL

MS1851S-310-B 1” x 6-7/8” Radius 1-1/8” DB

MS1851SW-310-A 1” x 6-7/8” Radius with Strip 1-1/8” AL

MS1851SW-310-B 1” x 6-7/8” Radius with Strip 1-1/8” DB

MS1852S-315-A 1” x 6-7/8” Bevel, LH 1-1/8” AL

MS1852S-315-B 1” x 6-7/8” Bevel, LH 1-1/8” DB

MS1852S-316-A 1” x 6-7/8” Bevel, RH 1-1/8” AL

MS1852S-316-B 1” x 6-7/8” Bevel, RH 1-1/8” DB

Other backsets available, 1-1/8” standard.

Insert 2 for 31/32 or 4 for 1-1/2.

MS+1890 Deadbolt / Latch

Maximum security deadbolt for after hours plus traffic control convenience for man-

agement during the business day. Typical installation is a bank or store requiring

three modes of door control:

1. Both lock and latch bolts retracted for unrestricted entry and exit during

business hours.

2. Handle-operated latch for exit-only traffic just after closing.

3. Maximum security hookbolt for overnight lockup.

NOTE: Handle or paddle operates latchbolt only.

Item Faceplate Backset Finish

MS+1890-3026-A 1” x 6-7/8” Flat, RH 1-1/8” AL

MS+1890-3025-A 1” x 6-7/8” Flat, LH 1-1/8” AL

MS+1890-3026-B 1” x 6-7/8” Flat, RH 1-1/8” DB

MS+1890-3025-B 1” x 6-7/8” Flat, LH 1-1/8” DB

2190 Interconnected Deadbolt / Latch

The industry’s first narrow stile interconnected deadbolt and deadlatch for alu-

minum entrance systems. The 2190 provides the functionality of a full mortise lock

in a narrow stile package, while meeting the most stringent building egress require-

ments. 2190 combines the critical elements of security and control with aesthetic

appeal. With the deadbolt projected, a simple turn of the inside lever retracts both

the latch and deadbolt simultaneously – proving code-compliant, panic-proof ex-

iting.

Item Backset Trim/Handle Finish

2190-311-101-630 1-1/8” Trim Set, 01, Curve 630

2190-311-102-630 1-1/8” Trim Set, 02, Round 630

2190-311-103-630 1-1/8” Trim Set, 03, Square 630

2190-311-201-630 1-1/8” Elec. Trim Set, 01, Curve 630

2190-311-301-630 1-1/8” Passage Set, 01, Curve 630

2190-311-303-630 1-1/8” Passage Set, 03, Square 630