Specifications

Michigan 800-522-2940 • North Carolina 800-768-6050 • Texas 877-347-5117
VON DUPRIN
46
Miscellaneous Von Duprin Parts
We stock a huge variety of Von Duprin parts, a few of which, are listed below!
050534 Potted Circuit Breaker (EL Solenoid)
050535 EL Solenoid & Plunger Assembly w/ Bracket
050536 EL Solenoid & Connector Assembly Hex Dogging
108255 Base Plate Assembly 2'6"-3' for 2227/3327/9927
050114 Hex Key Dogging Kit for 33/99 Series
050117 Hex Key Dogging Kit for 35/98 Series
050115 Cylinder Dogging Kit for 33/35/98/99 Series
090084A 5/32" Single Dogging Key
091080A 7/32" Single Dogging Key
051808 8’-10’ Extension Rod for 3327/3347/9927/9947
22S12ER 12” Extension Rod for 2227
22S36ER 36” Extension Rod for 2227
051701 12” Extension Rod for 8827
051703 24” Extension Rod for 8827
98S12ER 12” Extension Rod for 9827
98S36ER 36” Extension Rod for 9827
99S12ER 12” Extension Rod for 9927
99S36ER 36” Extension Rod for 9927
264 Rim Strike
299 Rim Strike
299-F Fire Rated Rim Strike
1408 Rim Strike
1409 Rim Strike
1410 Rim Strike
1606 Rim Strike
1609 Rim Strike
PS900 & PS914 Series Power Supplies
Schlage’s comprehensive line of power supplies and option boards were designed
to address the changing needs of the access control market and are UL294 listed. In-
stallation is simplified by utilizing a flat mounting design and polarized locking con-
nectors for option boards. This new design eliminates the need for racks and side
connectors. The flat mounting of the option boards also provides for easier access
to the terminal blocks for connection of electrified devices (such as electrified strikes,
electromagnetic locks, card readers, etc). Common to the line of PS900 Series power
supplies is a constant output rating at both 12v and 24v settings, universal 120 VAC
to 240 VAC input, and polarized option board connectors. New fire alarm interface
board mounting allows outputs to be configured as switched (power cut) or
unswitched (power continues) when signal provided. PS914 and 900-2RS are avail-
able for use with electrified exit devices. Enclosure is 14"H x 12"W x 4"D.
Item Description
PS902 PS902, 2A@12/24 VDC
PS902-FA PS902 w/ Emergency Interface Relay (FA)
PS902-2Q PS902 w/ 2 Relay QEL Panic Device Control Board
PS902-4R PS902 w/ 4 Independently Controlled Relays
PS904 PS904, 4A@12/24 VDC
PS904-2RS PS904 w/ 2 Relay QEL Panic Device Control Board
PS904-4R PS904 w/ 4 Independently Controlled Relays
PS906 PS906, 6A@12/24 VDC
PS906-4R PS906 w/ 4 Independently Controlled Relays
PS914 PS914 , 4A (16A Inrush) @ 12/24 VDC
PS914-2R PS914 , 4A (16A Inrush) @ 12/24 VDC, 2 Relays
Option Boards Description
900-2R 2 Independently Controlled Relays
900-FA Emergency Interface Relay (FA)
900-4R 4 Independently Controlled Relays
900-4R FA 4 Independently Controlled Relays with FA
900-2Q 2 Relay Board for Controlling QEL Exit Device
900-2Q FA 2 Relay Board for Controlling QEL Exit Device w/ FA
900-4RL 4 Relay Board w/ Integrated Logic for Controlling
Security Interlocks, Auto Operators, & Time Delays
900-8F-FA 8 Fuse Protected Outputs w/ FA
900-BB Battery Backup Board Only
Electric Power Transfer
EPT-10, Ten 24VDC 1 Amp. EPT-2, Two 18 gauge wires rating, 24VDC 2 Amp., 16 Amp.
maximum surge. For many uses including EL devices.
Item Description Finish
EPT1028 EPT-10 Aluminum
EPT228 EPT-2 Aluminum
EPT10313 EPT-10 Dark Bronze
EPT2313 EPT-2 Dark Bronze
Use with
Use with
Von Duprin
Von Duprin
EL Devices!
EL Devices!
Electric
Electric
Power
Power
Transfer
Transfer
EL & QEL Electric Latch Retraction Conversion Kits
EL & QEL conversion kits will change any new or existing Von Duprin 33/35 or 98/99
series exit device to a latch retraction device. Includes EL Baseplate 2 conductor cable
and PCB module. Will not void UL listing! Available in 24VDC only. EL requires PS-
912 power supply. QEL features quieter operation, both mechanically and electri-
cally. QEL requires PS902 or PS914 power supply.
Item Description
QEL+ 3’ 3’ Quiet Electric Latch Retraction Conversion Kit
QEL+ 4’ 4’ Quiet Electric Latch Retraction Conversion Kit
EL-3 3' Electric Latch Retraction Conversion Kit
EL-4 4' Electric Latch Retraction Conversion Kit
HDEL-3 3’ Electric Latch Retraction Conversion Kit with Hex Dogging
HDEL-4 4’ Electric Latch Retraction Conversion Kit with Hex Dogging
5100 Electric Strike
The 5100 has been designed and manufactured to meet the needs of locksmiths and
security professionals. This easy-to-install electric strike was created for medium duty
applications, specifically to control traffic flow through interior and exterior openings
in retail and commercial environments.
Each electric strike kit comes standard with three faceplates for hollow metal, wood
or aluminum frames, a 12/24 dual-voltage solenoid, fail safe/fail secure selectability
and an adjustable keeper. Features heavy-duty construction, tamper resistant design,
tested to over one million cycles and has 1300 lbs. holding strength.
Item Description Finish
5100-622 12/24 Dual Voltage, FS/FSE Selectability Black
5100-689 12/24 Dual Voltage, FS/FSE Selectability Aluminum
5100-695 12/24 Dual Voltage, FS/FSE Selectability Dark Brown
6300 Electric Strike
The 6300 Series Surface Mount Electric Strike is ideal for aftermar-
ket versatility and migrating existing openings to electronic ac-
cess control. Its single piece housing and smooth design will
reduce interference with traffic while providing durability to ex-
ternal damage. Easy to install without modifying or altering the
door frame, this strike can be mounted on any hollow metal, alu-
minum or wood frame. The 6300 Series was specifically designed
for use with the Von Duprin 98/99, however it can be used with
most rim exits. UL10C Fire Listed, up to 3 hours.
Item Description Finish
6300-32D 12/24 Dual Voltage Satin Stainless Steel
Includes all 3 face
Includes all 3 face
-
-
plates for hollow
plates for hollow
metal, wood or
metal, wood or
aluminum frames!
aluminum frames!
PS914
PS914
PS904
PS904
PS906
PS906