Specifications

ManualsBrandsSentry ManualsBusiness equipmentPR100

Michigan 800-522-2940 • North Carolina 800-768-6050 • Texas 877-347-5117

SECUARKEY • SECURITRON

SA Series Access Control Units

Securakey’s 26SA & 28SA card access control units utilizes state of the art electronics

in providing a product that is both inexpensive and fully programmable. The

patented slotless Touch Card

reader is protected from weather and vandalism. Sim-

ply place the card on the stainless steel touch plate, and the card is read instantly

and errorlessly. A green light indicates that access has been granted.

Item Description

26SA 3500 Card Capacity

28SA 65000 Card Capacity

PD-26 Programming Deck

SKC-06/50-PD 50 SKC-06 Cards with PD-26 Programming Deck

SKC-06/100P-PD 100 SKC-06 Cards with PD-26 Programming Deck

SKC-06/250-PD 250 SKC-06 Cards with PD-26 Programming Deck

FMA Flange Mount Adapter with Weather Shield

PMA Post Mount Adapter with Weather Shield

SK-ACP 2 Door Access Advanced Control Panel

This panel supports two Wiegand output card readers. Other features include:

65,000 card capacity, 4,800 date and time stamped stored events, 15 programmable

time zones with weekly schedule plus holidays and 32 programmable holidays. It

is highly sophisticated, yet simple to use. Each of the two doors controlled by the

unit is completely independent of the other and is configured, programmed and

viewed separately. Each has a separate node address. As a stand alone, the unit

may be programmed using a PC either locally or via a Modem over standard phone

lines. Information is stored by the unit and may be downloaded to a PC or printer.

Item Description

SK-ACP 2 Door Access Control Panel

RK-WM & RK-WS Proximity Readers

Radio Key

RK-WM & RK-WS Proximity Readers are designed to integrate into any

system requiring a Wiegand output. The readers will read SecuraKey proximity cards

or key tags and transmit the data in virtually any Wiegand Format up to 40 bits. Se-

curaKey’s exclusive DYNASCAN® technology* assures maximum performance in any

environment. This completely potted unit is rated for extreme weather use and is

vandal resistant. Includes LED and buzzer control. Installation is easy.

Item Description

RK-WM Mullion Size Proximity Reader

RK-WS Single Gang Proximity Reader

Vista Maglocks

VM600 - 600 lbs. holding force maglock with field selectable dual voltage. Suitable

for interior doors where physical assault is not expected. Indoor use only.

Current Draw: 520mA at 12VDC, 260mA at 24VDC

VM1200 - 1200 lbs. holding force maglock with field selectable dual voltage.

VM1200 is recommended for interior and perimeter security doors. Indoor use only.

Current Draw: 520mA at 12VDC, 260mA at 24VDC

• 12 or 24 VDC (field selectable) • Instant release (no residual magnetism)

• Individually tested for holding force • Optional Bond Sensor available

• Easy mount adjustable bracket • Wire access chamber w/ plug-In connect

Item Description Finish

VM600 600 Lb. Maglock US28

VM1200 1200 Lb. Maglock US28

VM1200DB 1200 Lb. Maglock with DPS and Bond Sensor US28

MM15 Electromechanical Maglock

MM15 is a 4000 lb. holding force dual voltage, dual current Maglock for interior or

exterior doors. It is fail safe, but can be installed with a battery backup power supply.

MM15 is available in three different finishes determined by means of a snap-on

metal dress cover that also screws into the front of the lock body for added protec-

tion. The stainless dress cover is provided standard with the MM15.

Item Description Finish

MM15 MM15 Electromechanical Lock US32D

MM15DT MM15 Electromechanical Lock with DP/TW Switches US32D

MM15G MM15 Electromechanical Lock with Conduit Option US32D

4,000 LBS. OF

HOLDING FORCE!

AQD3 & AQD5 Series Power Supplies

Securitron’s AccuPower Switching Power Supplies provide clean, filtered and accu-

rate low-voltage DC power to protect and enhance the performance of all access

control devices. These are designed to minimize frequency noise, which can cause

misreads with contactless card readers and can disrupt the performance of radio

frequency devices. These are dual voltage, supervised units with a battery charger.

AQD3 - These units are field selectable, with a fast battery charge reserve. They pro-

vide a maximum 2.8 Amps at 12VDC or 1.4 Amps at 24VDC, with up to eight (8) in-

dependently controlled, power limited outputs. 3 Amp / 1.5 Amp.

AQD5 - These units provide field selectable 5 Amps at 12VDC or 3 Amps at 24VDC,

with up to eight (8) independently controlled, power limited outputs.

Item Amps Output/Relay Type Fuse/Rating

AQD3 3/1.5 1 Output N/A

AQD3-1R 3/1.5 1 Output, Fire Relay N/A

AQD3-4C 3/1.5 4 Output PTC, 0.35 A

AQD3-8C 3/1.5 8 Output PTC, 0.35 A

AQD3-8C1R 3/1.5 8 Output, Fire Relay PTC, 1.23 A

AQD3-8F8R 3/1.5 8 Output, Access Ctrl w/ Fire Fuse, 0.5 A

AQD5 5/3 1 Output N/A

AQD5-4C 5/3 4 Output PTC, 1.4A

AQD5-8C 5/3 8 Output PTC, 0.72 A

VM600

VM1200

SK-ACP

RK-WM

RK-WS

26SA

PowerJump ICPT™

The Securitron PowerJump ICPT (Inductive Coupling Power Transfer) ports power

contactlessly and invisibly across the door gap to run electrified hardware on the

door. With flexible installation placement on the latch side, hinge side or top of the

door, it transfers power without pins or wires, eliminating points of vulnerability and

wear... and no need to core drill the door! Transfers power wirelessly across door

gaps of up to 3/16". For fail secure devices, use with electrified locks, latches or other

door hardware requiring up to 6 watts (0.5A@12VDC) of power. Adhesive backed

templates for accurate installation.

Item Description

ICPT 12VDC@500ma / 24VDC@250ma, Field Selectable

ICPT:

Inductive

Coupling

Power

Transfer