Specifications
ROCKWOOD
WWW.JLMWHOLESALE.COM
27
90
O
Offset Door Pulls
These one inch diameter door pulls are the industry standard for contemporary de-
sign. Rockwood sets the benchmark for quality and value in this product category.
Offset pulls come with a 2-1/2" clearance for enhanced ADA compliance.
Item Description CTC Finish
BF156.10B Solid Door Pull 8” US10B
BF156.32D Solid Door Pull 8” US32D
BF157A.28 Solid Door Pull 9” US28
BF157A.32D Solid Door Pull 9” US32D
BF157.10B Solid Door Pull 10” US10B
BF157.28 Solid Door Pull 10” US28
BF157.3 Solid Door Pull 10” US3
BF157.313AN Solid Door Pull 10” 313AN
BF157.32D Solid Door Pull 10” US32D
BF158.10B Solid Door Pull 12” US10B
BF158.28 Solid Door Pull 12” US28
BF158.313 Solid Door Pull 12” 313AN
BF158.32D Solid Door Pull 12” US32D
TBF156.10B Tubular Door Pull 8” US10B
TBF156.32D Tubular Door Pull 8” US32D
TBF157A.32D Tubular Door Pull 9” US32D
TBF157.10B Tubular Door Pull 10” US10B
TBF157.32D Tubular Door Pull 10” US32D
TBF158.10B Tubular Door Pull 12” US10B
TBF158.32D Tubular Door Pull 12” US32D
Series 47 Offset Single Bar Sets
These one inch diameter push and pulls are the indus
try standard for contemporary
design and Rockwood sets the standard for quality and value in this product cate-
gory. Offset pulls come with a 2-1/2" clearance.
Item Description CTC Finish
BF1564732D Solid Push/Pull 33”/8” US32D
BF157A47313AN Solid Push/Pull 33”/9” 313AN
BF1574728 Solid Push/Pull 33”/10” US28
BF15747313AN Solid Push/Pull 33”/10” 313AN
BF1574732D Solid Push/Pull 33”/10” US32D
BF1584728 Solid Push/Pull 33”/12” US28
BF15847313AN Solid Push/Pull 33”/12” 313AN
BF1584732D Solid Push/Pull 33”’/12” US32D
BF1594732D Solid Push/Pull 33”’/18” US32D
BF15947629 Solid Push/Pull 33”’/18” US32
TBF1564732D Tubular Push/Pull 33”/8” US32D
TBF1574710B Tubular Push/Pull 33”/10” US10B
TBF15747313AN Tubular Push/Pull 33”/10” 313AN
TBF1574732D Tubular Push/Pull 33”/10” US32D
TBF1584710B Tubular Push/Pull 33”/12” US10B
TBF1584732D Tubular Push/Pull 33”/12” US32D
Tubular Pulls
1-1/4" and 1-1/2" diameter tubular pulls and pushes
are made from rugged 16
gauge wall tubing with solid brass end inserts. These large diameter pulls provide
a greater door contact area which ensures that Rockwood's guaranteed fastening
system will provide a tight permanent installation.
Item Description CTC Dia.
RM201 Tubular Offset Pull 12” 1-1/4”
RM202 Tubular Offset Pull 18” 1-1/4”
RM203 Tubular Offset Pull 24” 1-1/4”
RM204 Tubular Offset Pull 36” 1-1/4”
RM221 Tubular Offset Pull 12” 1-1/2”
RM222 Tubular Offset Pull 18” 1-1/2”
RM223 Tubular Offset Pull 24” 1-1/2”
RM224 Tubular Offset Pull 36” 1-1/2”
RM301 Tubular Straight Pull 12” 1-1/4”
RM302 Tubular Straight Pull 18” 1-1/4”
RM303 Tubular Straight Pull 24” 1-1/4”
RM304 Tubular Straight Pull 36” 1-1/4”
LP3301 Locking Pull
PostMount™ - This basic post mounted pull is a clean and
simple design. The simplicity adds contemporary beauty
to standard entrance doors.
• Key operated from outside; turn piece on inside
• Cylinder options: Yale 1109 rim cylinder, Yale K680 SFIC
housing, or less cylinder
• Door types: 3/8" - 1" thick glass, 1-3/4" to 2-1/2" thick
aluminum, hollow metal or wood doors
• Multiple locking options: floor, head or both
• Bolt location: 2" from face of door to centerline of bolt
• Bolt has 13/16" travel with fine adjustment
• Available in brass, bronze and stainless steel
Item Description Dia.
LP3301DBD Half Height, Bolts Down 1-1/4”
LP3301DBU Half Height, Bolts Up 1-1/4”
LP3301FHD Full Height, Bolts Down 1-1/4”
LP3301FHU Full Height, Bolts Up 1-1/4”
LP3301FHB Full Height, Bolts Up and Down 1-1/4”
Kick Plates and Push Plates
Rockwood kick plates are .050” thick. Rockwood push
plates are also .050” thick and the edges are bevelled. Cus-
tom sizes are available.
Item Description Size
KP10x34 32D Kick Plate 10” x 34”
KP10x34.5 US32D Kick Plate 10” x 34.5”
KP12"x34" 32D Kick Plate 12” x 34”
70A32D Push Plate 3” x 12”
70B32D Push Plate 3.5” x 15”
70C32D Push Plate 4” x 16”
Long Door Pulls
Long door pulls are an artful and functional solution
for any door. Most often used as full height, these
pulls are available in three diameters and any length
from 3 feet to over 8 feet long. Available in brass,
bronze and stainless steel. Center to center (36” to
96”) and length need to be specified when ordering.
Straight Pulls Description Diameter
RM3300 Square Ends 1”
RM3301 Square Ends 1-1/4”
RM3302 Square Ends 1-1/2”
RM3320 Round Ends 1”
RM3321 Round Ends 1-1/4”
RM3322 Round Ends 1-1/2”
RM3340 Bent Ends 1”
RM3341 Bent Ends 1-1/4”
RM3342 Bent Ends 1-1/2”
Offset Pulls Description Diameter
RM3310 Square Ends 1”
RM3311 Square Ends 1-1/4”
RM3312 Square Ends 1-1/2”
RM3330 Round Ends 1”
RM3331 Round Ends 1-1/4”
RM3332 Round Ends 1-1/2”
Straight Push Pull Sets
These 1-1/4 inch diameter sets are the industry standard for contemporary design.
Offset pulls come with a 2-1/2" clearance for enhanced ADA compliance.
Item Description Pull CTC Diameter
RM351 Tubular Set 12” - Specify Bar CTC 1-1/4”
RM352 Tubular Set 18” - Specify Bar CTC 1-1/4”