INDEX OF PRODUCTS ACCESS CONTROL SYSTEMS .............................10, 37, 38 CYLINDRICAL LOCKS ...................8, 29, 30, 32, 37, 41, 51 CYLINDERS ...............................................................6, 33 CLOSERS/HOLDERS/OPENERS....10, 13, 14, 16, 22-25, 51 DEADBOLTS/LOCKS/LATCHES ........4-5, 16, 19, 33, 36, 41 ELECTRIC STRIKES..........2, 4, 14-15, 17-18, 21, 39, 43-46 EXIT ALARMS ............................................
TABLE OF CONTENTS AIPHONE .............................................................................8 Intercom Systems. ALARM CONTROLS..............................................................8 Magnetic Locks. ALARM LOCK.......................................................................8 Exit Alarms and Panic Locks. ALTRONIX............................................................................9 Power Supplies and Timers. AMANO ...............................................................
7100 Electric Strike 7140 Electric Strike 7110 / 7111 Electric Strike For aluminum doors and frames. Use 7100 for round, 7101 for radiused frames. For use with locks with up to a 1/2" latch bolt. For hollow metal doors and frames. For use with locks with up to a 5/8" latch bolt. Square corner faceplate. For wood doors and frames. For use with locks with up to a 1/2" latch bolt. Round corner faceplate.
MS1861 1830 MS3090 MS1850S 4006 MS+1890 MS1850S Maximum Security Deadlock 1830 Bottom Rail Deadlock For maximum security on your door you can’t go wrong with an Adams Rite MS Series lock designed for aluminum, steel and wood doors. You can lock your door at 1, 2 or 3 points along the edge of the door and frame. For bottom rail locking of ultra-narrow stile or tempered glass doors whose bottom rail (shoe) is too shallow for the MS1861.
MS BOLT ACCESSORIES 8650 4015 1870 1877 4089 4085 MS4043 MS1880 8650 Escutcheon 4015 Threshold Bolt Adding the 4015 Threshold Bolt to a pivoted bolt MS deadlock allows maximum security for pairs of doors by the turn of a single key. The two-point lock secures the entire double door entrance.
8200 8400 4568 8800 4569 4590 4591 4568 & 4569 Series Lever Handles 8200 Series Surface Vertical Rod Exit Devices Designed to operate 4700 Series latches by a natural downward hand movement, prevents snagging. These handles incorporate an activator cam disc that mounts on the handle escutcheon and fits solidly into the cylinder hole of the latch. 8200 Series surface vertical rod device is 36” and fits 3’0 door.
Aiphone C123L LEM-1DLS Intercom LEF-3 Intercom A one or two master door answering system with one door station. Transformer required for AC operation. A one station intercom system with door release comes complete with LE-D door station and an AC transformer to power the system. A three call master station intercom system. You can order door station and transformer separately. Includes privacy button to prevent eavesdropping.
AL400 Board SMP-3 SMP-10 AL175UL AL200 SMP-5 SMP-7 SMP Power Supplies UL Listed Power Supplies SMP3 Single Output Power Supply/Charger converts low voltage AC input, to a 6, 12 or 24VDC @ 2.5 Amp of continuous supply current output. SMP5 Power Supply/Charger converts low voltage AC input, to a 6, 12 or 24VDC @ 4 Amp of continuous supply current output. SMP7 Power Supply/Charger converts low voltage AC input, to a 12 or 24VDC @ 6 Amp of continuous supply current output.
ED4000 Series CL 3100 Series DC6000 Series AMANO • ACSI • CORBIN RUSSWIN • DETECTION SYSTEMS Amano Nexus Lite Corbin Russwin The Nexus Lite system provides advanced access control features in an affordable package. The large, two and half inch color TFT touch screen brings complete system configuration and control to your fingertips and built in wizards simplify initial setup and enrollment.
ECL600 ECL-230D V40 Series Alarmed Rim Exit Devices V40xEB is powered by a 9-volt battery. V40xEBxW is powered by a 9-volt battery and is weather resistant. V40xEH is powered by standard 12-volt AC power and has a 9-volt battery backup. V40xEHxR is the same as the V40xEH but includes a remote signalling function. V40xEI is powered by standard 12-volt AC power, has a 9-volt battery backup and includes electronic integration.
10 Series 20 Series 3000 21 Series 3000 Series Magnetic Locks 10 Series Rim Exit Devices The 10 Series rim exit device is super-heavy-duty panic and fire exit hardware for use on all types of single and double doors with mullions. The patented mounting plate and strike locator system ensures easy and accurate installation.
24-R 25-V 510L 25-R 712L 710TP Dynatool ADA EZ Door Opener 24-R Series Narrow Stile Rim Exits 25-R Series Rim Exits The ADA EZ wire free door opener provides easy access into your facility for people with disabilities. It is an extreme duty, low energy opener designed for institutional, high traffic manual opening applications that occasionally require automatic operation. A regenerative drive system charges an onboard battery pack eliminating the need for electrical power.
SC60 SC80 8200 Series Automatic Operators SC60 Series Closers Falcon SC60 Series was designed to meet the most common installation and application requirements in the commercial marketplace. SC60 closers are suitable for interior doors from 30" to 60" wide and exterior doors up to 42" wide. SC61 closers are suitable for interior doors up to 48" wide and can be adjusted to meet the ADA accessibility requirements. SC65 is adjustable size 5 and for interior doors 30" to 54" wide & exterior doors to 42".
310-2 Electric Strike 310-2 3/4 Electric Strike This industrial grade electric strike is used with cylindrical locks, mortise locks* and mortise exit devices with a 1/2" or 5/8" throw latchbolt (without deadbolt) on single and pairs of doors. 1/2" keeper standard, fail secure standard. This heavy duty electric strike is used with cylindrical locks, mortise locks and mortise exit devices with a 3/4" throw latchbolt (without deadbolt) on single doors. 3/4" keeper standard, fail secure standard.
90 Series 100 Series 450 Series 90 Series HD Surface Holders 100 Series HD Concealed Holders 450 Series Surface Holders Models are available in 300 Series stainless steel, brass/bronze, and steel materials. Three basic models are available, each offered in five sizes to accommodate virtually all openings. The 100 Series units provide a wide range of optional features. Three basic models are available, each offered in six sizes to accommodate virtually all openings.
1006 5000 Series Over 2,000 lbs. Holding Force K Option N Option 5200 Series A Option Over 1,500 lbs. Holding Force 5000/5200/5200C Electric Strikes H Option J Option T Option The 5000 projects only 1-1/16" into the frame cut out. For use with locks having up to 5/8" latchbolts. Field reversible from fail secure to fail safe. Dual voltage, 24A@12VDC or .12A@24VDC. 5000C Complete Pac includes 5200 electric strike body, 501 & 501A and mounting hardware.
701 789S 783S 702 9400 For 1/2” Throw Rim Exit Devices! 9500 786S 7000 Series Electric Strikes 9400/9500/9600 Surface Mounted Electric Strikes Universal strike body designed to be combined with faceplate kits shown below. Available in 12 or 24VDC and fail secure reversible to fail safe. (FS) Includes 1005 Goof Plate. 7000C Complete Pac includes 7000 electric strike body, 791 and 792 faceplate and mounting hardware.
451 Series Deadlatch Offers flexibility of traffic control for buildings that require free entrance during specific times and exit only at other times. Interchangeable with the 185 Series Deadbolts. Available in 31⁄32", 11⁄8" or 1-1⁄2" backsets, 1-1/8” shown in part numbers below. Latchbolt: 5⁄8"W x 1-1⁄2"L, field reversible handing.
SR64 WS40 WS407CCV WS407CVX FS436 1600 FS438 RL30 FS444 RL36 Dome & Floor Stops RL30 & RL36 Roller Latches FS436 Dome Stops are for doors without a threshold. They have a gray, non-marring rubber bumper and measure 1” high. FS438 Dome Stops are for doors with a threshold or undercut doors. They have a gray, non-marring rubber bumper and measure 1” high. FS444 Floor Stops is ideal for indoor or outdoor use and accommodates a door undercut of up to 2-1/2”.
FB458 COR Bar Coordinator FB31P CB1 FL Filler Bar FB41P DP1 MB1 MB2 COR7G FB358 DP2 Flush Bolts FB358 Manual Flush Bolts are for wood doors. Bolts have 3/4” throw with a 7/8” vertical adjustment, non-handed. FB458 Manual Flush Bolts are for metal doors. Bolts have 3/4” throw with a bolt backset of 3/4”. Standard rod length is 12”, which is measured from the center of the flush bolt body to the bolt tip, optional lengths are available. FB31 Automatic Flush Bolts are for metal doors.
Non-Handed Non-Sized, Quick Installation. Non-Handed Non-Sized, 3 Mount., Med. Duty. Concealed Overhead Closers. 1260 Series Closer 1460 Super Stock Closer 2010 & 5010 Series Closers The 1260 series cast iron closer is designed for low to moderate traffic in both interior and exterior applications. The 1260 is ideal for hotels/motels, retail/restaurants, offices/banks, manufacturing, and other light commercial facilities.
Handed, Non-Sized, Pull Side Mounting. Handed, Non-Sized, Top Jamb Mounting. Non-Handed Non-Sized, Heavy Duty. 4010 Smoothee Series Closer 4020 Smoothee Series Closer 4040XP Series Closer Standard 4010 Series Closer shipped with regular (non-hold-open) arm, standard cover, and wood and machine screw pack. Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”.
Handed Non-Sized, Parallel Arm Heavy Duty. AIR ELECTRIC Pneumatic Handicap Assisted Door Operators. Handicap Assisted Door Operators. 4811 Series Pull Side Mounted 4631 Series Pull Side Mounted The 4811 Series is UL and ULC listed with standard arm for self-closing doors and meets the provisions of ANSI Standards A117.1,A156.19, and standard, plate mounted 4810 series closer shipped with single lever (standard) arm, metal cover, regular track (non-holdopen), and wood and machine screw pack.
National Guard Products 8310-853T Wall Mount Actuator 8310-856 Wall Mount Actuator 8310-818 Jamb Mount Actuator LCN Actuators 8310-813 Hardwired, low voltage, “Wave to Open” actuator with a 4-3/4” plastic plate. 8310-818 Hardwired, low voltage, jamb mount actuator with a 1-1/2”W x 4-3/4”H rectangular, stainless steel touch plate with engraved blue filled handicap symbol. 8310-852 Hardwired, low voltage actuator with a 6” round, stainless steel touch plate with engraved blue filled handicap symbol.
27 Series Floor Closer 180 Top M19 Intermediate 195 Bottom 27 Series Offset Hung Floor Closers Rixson Pivots Single acting and handed. 3/4” offset floor closers locate the pivot point 3/4” from the heel edge of the door and 3/4” from the face of the door. Door edges must be beveled 1/8” in 2”. Frame doorstop must be provided at door closed position. For use on interior or exterior doors up to 450 pounds and sizes up to 4’0” x 8’6”. Bottom Pivots: 117 bottom pivot mortised into floor.
Long Door Pulls Long door pulls are an artful and functional solution for any door. Most often used as full height, these pulls are available in three diameters and any length from 3 feet to over 8 feet long. Available in brass, bronze and stainless steel. Center to center (36” to 96”) and length need to be specified when ordering. Item BF156.10B BF156.32D BF157A.28 BF157A.32D BF157.10B BF157.28 BF157.3 BF157.313AN BF157.32D BF158.10B BF158.28 BF158.313 BF158.32D TBF156.10B TBF156.32D TBF157A.32D TBF157.
780-053 & 780-053HD Half Surface Continuous Hinges 780-112 & 780-112HD Full Mortise Continuous Hinges 780-224 & 780-224HD Concealed Leaf Continuous Hinges 780-053 standard duty, medium frequency 1-3/4” or 1-3/8” doors to 200 lbs. 780-053HD heavy duty, high frequency or heavy medium frequency heavy doors. 780-112 standard duty, medium frequency doors to 200 lbs. 780-112HD heavy duty, high frequency or heavy medium frequency doors. 780-224 standard duty, medium frequency 1-3/4” doors to 200 lbs.
Harmony for Cylindrical Locks 8700 Harmony for Exit Devices Harmony for Mortise Locks 8800 8400 Sargent Exit Devices Harmony Series Sargent manufactures a full line of exit devices including vertical rod, rim and mortise for both standard and narrow stile doors. These devices provide the best combination of simplicity, strength, durability, aesthetics and innovation and are perfect for applications such as commercial office buildings, medical & educational institutions.
AL SERIES AL10S AL Series Lock (w/ Saturn Lever) AL Series Standard Duty Commercial Locks AL Series keyed lever locks are used in standard duty commercial exterior and interior doors for medical, office, motel/hotel, public buildings, religious, multi-family, retail/storefront and government facilities. Also available for heavy duty residential buildings. ANSI A156.2, 1996, Series 4000 Grade 2. UL listed for 3 hour fire doors. Neptune and Saturn levers comply with ADA requirements and are nonhanded.
03 L SERIES 06 17 L9010 L9040 L9410 L Series Functions, Non-Keyed Locks L N L Series Extra Heavy Duty Mortise Locks For commercial and institutional buildings where the finest in mortise locks are required. Exceeds 800,000 cycle ANSI Grade 1 requirements. Exceeds ANSI A156.13, 1994, Grade 1 lock lever torque requirements. UL listed for 3 hour fire doors.
ND SERIES ND25D ND40S ND Series Lock (w/ Rhodes Lever) ND10S / ND12D ND44S ND170 ND Series Functions, Non-Keyed Locks ND10S, Passage Latch - Both levers are always unlocked. ND Series Extra Heavy Duty Commercial Locks ND12S, Exit Lock - Outside lever always fixed. Inside lever always unlocked.
B600 SERIES AL Series Cylinders B600 Series Heavy Duty Commercial Grade Deadbolts Extra heavy duty B600 Series construction for commercial, institutional and industrial uses. Also suitable for all residential uses. Available for high security applications. ANSI A156.5 - 1992 Grade 1 auxiliary lock. UL listed for 3 hour fire doors. 1” throw high strength, steel alloy deadbolt with hardened steel roller resists kick-in attacks. Large inside thumbturn makes it easy to throw and retract deadbolt.
621 NS 621 EX 621 H NS 621 & 621 NS Heavy Duty 623 623 EX 623 H NS 623 & 623 NS Heavy Duty 625 NS 625 EX 625 H NS 625 & 625 NS Heavy Duty Pushbutton rated 5A@250VAC momentary SPDT contacts. Stainless steel cover plate with 1-5/8” button. Plate: 2-3/4" x 4-1/2", Narrow Plate 1-3/4" x 4-1/2" Pushbutton rated 5A@250VAC momentary SPDT contacts. Stainless steel cover plate with 2-3/4” button.
SPECIALTY MAGNETIC LOCKS M490 GF3000 M490G M450 M420 320M M490DE GF3000 Shear Lock GF3000’s unique mounting features provide a “floating” action of both the lock assembly and the armature which allows the magnet assembly to move towards the armature during the locking process. In this manner, the GF3000 is able to overcome gaps of up to 1/4 inch without voltage or current inrush. Once engaged, it provides 3,000 pounds holding force.
672 692 PS902 PS904 PS906 PS900 & PS914 Series Power Supplies 672 & 692 Series Request to Exit Bars Schlage’s comprehensive line of power supplies and option boards were designed to address the changing needs of the access control market and are UL294 listed. Installation is simplified by utilizing a flat mounting design and polarized locking connectors for option boards. This new design eliminates the need for racks and side connectors.
SK-910RBQ SECO-LARM offers an impressive line of over 400 security SK-910RB2 products ranging from very simple switches to some of the SK-910RBQ & SK-910RB2 RF Receivers Item SK-910RBQ SK-910RB2 Description One-Channel RF Receiver Two-Channel RF Receiver SD-961A-36 Push-to-Exit Bar Designed to allow egress from inside an area normally locked by an electric lock or electromagnetic lock, and/or to disarm (shunt) or trigger an alarm when the door is opened.
26SA 4,000 LBS. OF HOLDING FORCE! RK-WM MM15 Electromechanical Maglock RK-WS SK-ACP SA Series Access Control Units Securakey’s 26SA & 28SA card access control units utilizes state of the art electronics in providing a product that is both inexpensive and fully programmable. The patented slotless Touch Card® reader is protected from weather and vandalism. Simply place the card on the stainless steel touch plate, and the card is read instantly and errorlessly.
M32 M62 Simple, Stylish & Secure! DK Control Box M370 M680BDX M34R M380 Magnalocks Stylish New Design Magnalocks M32 Series features 600 lbs. holding force. 12/24VDC dual voltage operation. Stainless steel housing. Size: 8” x 1-3/4” x 1-1/2” M370 with 600 lbs. holding force delivers unsurpassed style and ease of installation. Size: 10"L x 2-7/16"D x 2-3/16"H M34R Series offers recessed mounting and results in 600 pounds of aesthetically concealed holding power. 12/24VDC dual voltage operation.
UnLatch Mortise UnLatch MK Series KP1 Series UnLatch & Mortise UnLatch Electric Strikes MK & KP1 Series Key Switches Motion Detector UnLatch has an innovative design which allows this electric strike to unlatch most cylindrical locksets. UnLatch releases under pressure and includes a latch status monitoring output as a standard feature. UnLatch screws into the existing door frame in seconds. Specify MUNL for use with a mortise lock. MK uses a standard builders hardware mortise cylinder.
1511 1512 1571 1511 Series Magnetic Lock 1512 Series Double Magnetic Lock 1571/1572 Magnetic Lock Featuring 1650 pounds holding force, dual 12/24VDC operation. For use on single doors. Featuring 1650 pounds holding force, dual 12/24VDC operation. For use on a pair of doors. Featuring 1200 pounds holding force, dual 12/24VDC operation and aluminum finish. 1572 is a double lock.
SL11, SL11HD & SL11LL SL21 & SL21HD SL24, SL24HD & SL24LL Full mortise hinges for use in new construction, and in renovations requiring door and/or frame replacement. Mounts flush with no door inset. Full surface hinge for permanent replacement for heavy duty entrances using existing door and frame. Also for new or existing entrances where the door must swing completely out of the frame opening. Available in 83” and 95” only.
NO CUTTING REQUIRED! 1 Box Solution! Item 4800-10B 4800-32D 4801-32D 4850-10B 4850-32D 4850-LCD-32D Designing innovative electric strikes for nearly 70 years! Finish US10B US32D US32D, For Square Bolt Devices US10B US32D Low Current, US32D 4100 Electric Strikes The one box solution for cylindrical and mortise locks! 4 faceplates, SS trim skirt, standard and torx screws, latch shims, plug-in style wire connectors and sealed crimp connectors.
6111 Electric Strike 6112 Electric Strike 6113 Electric Strike Faceplate Size: 6" x 1-5/8” Electric strike for use with rim exit devices on single doors or double doors with mullion applications (hollow metal, aluminum or wood). Designed to replace Von Duprin 3031. 32D finish for items below. Faceplate Size: 9" x 1-5/8” Electric strike for use with rim exit devices on single door applications (hollow metal, aluminum or wood). Designed to replace Folger Adam 310-4, minor frame prep. required.
6214 Electric Strike 6215 Electric Strike 6216 Electric Strike Faceplate Size: 9" x 1-3/8” Electric strike for use with mortise locks without deadbolt or cylindrical locks, on single door, hollow metal or aluminum frame applications (includes wood frame on retrofit applications). Designed to replace Folger Adam 310-2 3/4.
6300 Electric Strike The 6300 Series Surface Mount Electric Strike is ideal for aftermarket versatility and migrating existing openings to electronic access control. Its single piece housing and smooth design will reduce interference with traffic while providing durability to external damage. Easy to install without modifying or altering the door frame, this strike can be mounted on any hollow metal, aluminum or wood frame.
3327A Grooved Case 2227 3347A Grooved Case 22 35A Smooth Case 33A/35A Series Rim Exit Devices* 22 Series Rim Exit Devices Description 22 Exit Only 22 Exit Only 22 Exit Only 22 Exit Only 22 Exit Only, Fire Rated 22 Exit Only, Fire Rated 22 Exit Only, Fire Rated 22 Exit Only, Fire Rated Finish AL Anodized DB Anodized AL Anodized DB Anodized AL Anodized DB Anodized AL Anodized DB Anodized Length 3’ 3’ 4’ 4’ 3’ 3’ 4’ 4’ 2227 Series Surface Vertical Rod Exit Devices Item 22SE328 22SE339 22SE428 22SE439 22SE
55 88 5547 8827 55 Series Rim Exit Devices Item Description Finish 55 Exit Only Oil Rubbed Dark Bronze 55E10BR 55E26DR 55 Exit Only Dull Chrome 55E26PR 55 Exit Only Polished Chrome 55E3R 55 Exit Only Polished Brass 55E4R 55 Exit Only Dull Brass Substitute “R” in item number with “L” for LHR (left hand reverse).
99 Chexit Grooved Case 98 Rim Smooth Case 98/99 Chexit Delayed Egress Exit Devices* 98/99 Series Rim Exit Devices* Length 3’ 3’ 3’ 4’ 4’ 4’ 3’ 3’ 3’ 4’ 4’ 4’ Panic device that meets life safety codes and features electric delayed egress function. For wide stile wood or steel flush doors. PS914 Power Supply required for proper operation. 996L exterior lever available.
9975 Mortise Grooved Case 9975 Chexit Grooved Case 98/9975 Series Mortise Rim Exit Devices* Item 99ME326D 99ME328 99ME3313 99ME426D 99ME428 99ME4313 99MEF326D 99MEF328 99MEF3313 99MEF426D 99MEF428 99MEF4313 Description 9975 Exit Only 9975 Exit Only 9975 Exit Only 9975 Exit Only 9975 Exit Only 9975 Exit Only 9975 Exit Only, Fire Rated 9975 Exit Only, Fire Rated 9975 Exit Only, Fire Rated 9975 Exit Only, Fire Rated 9975 Exit Only, Fire Rated 9975 Exit Only, Fire Rated Finish Dull Chrome AL Anodized DB Ano
YALE • CUSTOM CONSOLES 8800 Series Mortise Locks Meticulous design and engineering have gone into manufacturing a mortise lock that brings you versatility as well as uncompromising strength and durability, 8800 Series. With quick lever handing and a quick reversible latchbolt, lockset handing takes only seconds. Add a standard non-handed curved lip strike, and you have a no-hassle mortise lock that’s quick and easy to install.
Our long awaited, much anticipated, new web site has launched! New Website: The feature-rich website is better than ever! New look, new feel, better search capabilities, easy access to catalog and technical information, online ordering and much more. We're very excited about the new web site and know you'll find it to be one of the best in the industry. Our main objective for our website is to make it easy for you to find the information you need on products we sell.
