Product manual

MultiPoint Level Control System
5
E 2001 Nordson Corporation
All rights reserved
321 351A
Issued 7/01
69–LVL–EH–IS–01
Operating Practices
S Familiarize yourself with the location and operation of all safety
devices and indicators.
S Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S Use the personal protective equipment (PPE) specified for each task.
Refer to Equipment Safety Information or the material manufacturer’s
instructions and MSDS for PPE requirements.
S Do not use equipment that is malfunctioning or shows signs of a
potential malfunction.
Maintenance and Repair Practices
S Perform scheduled maintenance activities at the intervals described
in this document.
S Relieve system hydraulic and pneumatic pressure before servicing
the equipment.
S De-energize the equipment and all auxiliary devices before servicing
the equipment.
S Use only new factory-authorized refurbished or replacement parts.
S Read and comply with the manufacturer’s instructions and the MSDS
supplied with equipment cleaning compounds.
NOTE: MSDSs for cleaning compounds sold by Nordson are
available from Nordson’s Website at www.nordson.com or by calling
Nordson Technical Support.
S Confirm the correct operation of all safety devices before placing the
equipment back into operation.
S Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable MSDS or
contact the authority having jurisdiction for information.
S Keep equipment safety warning labels clean. Replace worn or
damaged labels.