Product manual

MultiPoint Level Control System
4
E 2001 Nordson Corporation
All rights reserved
321 351A
Issued 7/01
69–LVL–EH–IS–01
Instructions and Safety Messages (contd)
S Read and follow the instructions provided in this document and other
referenced documents.
S Familiarize yourself with the location and meaning of the safety
warning labels and tags affixed to the equipment. Refer to Safety
Labels in this section.
S If you are unsure of how to use the equipment, contact your Nordson
representative for assistance.
Installation Practices
S Install the equipment in accordance with the instructions provided in
this document and in the documentation provided with auxiliary
devices.
S Ensure that the equipment is rated for the environment in which it will
be used and that the processing characteristics of the material will not
create a hazardous environment. Refer to the Material Safety Data
Sheet (MSDS) for the material.
S If the required installation configuration does not match the
installation instructions, contact your Nordson representative for
assistance.
S Position the equipment for safe operation. Observe the requirements
for clearance between the equipment and other objects.
S Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
S Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
S Ensure that fuses of the correct type and rating are installed in fused
equipment.
S Contact the authority having jurisdiction to determine the requirement
for installation permits or inspections.