Product manual

MultiPoint Level Control System
1
E 2001 Nordson Corporation
All rights reserved
321 351A
Issued 7/01
69–LVL–EH–IS–01
MultiPoint Level Control System
Read this section before using the equipment. This section contains
recommendations and practices applicable to the safe installation,
operation, and maintenance (hereafter referred to as ”use”) of the
product described in this document (hereafter referred to as
“equipment”). Additional safety information, in the form of task-specific
safety alert messages, appears as appropriate throughout this document.
WARNING: Failure to follow the safety messages,
recommendations, and hazard avoidance procedures provided
in this document can result in personal injury, including death,
or damage to equipment or property.
The following safety alert symbol and signal words are used throughout
this document to alert the reader to personal safety hazards or to identify
conditions that may result in damage to equipment or property. Comply
with all safety information that follows the signal word.
WARNING: Indicates a potentially hazardous situation that, if
not avoided, can result in serious personal injury, including
death.
CAUTION: Indicates a potentially hazardous situation that, if
not avoided, can result in minor or moderate personal injury.
CAUTION: (Used without the safety alert symbol) Indicates a
potentially hazardous situation that, if not avoided, can result in
damage to equipment or property.
1. Safety
Safety Alert Symbols