Product manual

MultiPoint Level Control System
11
E 2001 Nordson Corporation
All rights reserved
321 351A
Issued 7/01
69–LVL–EH–IS–01
System Description
The MultiPoint Level Controller automatically senses the adhesive level
in the applicator’s tank, thereby eliminating the need for an operator to
manually fill each unit. The Controller is responsible for refill, shutoff, and
alarm functions.
See Figure 1. The MultiPoint Level Control System consists of the
Control Box, the RIA 450 Level Controller, the MultiCap Probe and the
Lid Kit. Lid kits vary depending on the specific unit (lid kit is not shown in
Figure 1).
6901001A
AUTO
MAN
OFF
OVER
NORMAL
UNDER
MANUAL
AUTO
ON
OFF
SILENCE
203.2 mm
(8.00 in.)
323.9 mm
(12.75 in.)
PROBE
CONTROL BOX
R1A 450
LEVEL CONTROLLER
Fig. 1 MultiPoint Level Control System
2. System Overview