Product manual

MultiPoint Level Control System

E 2001 Nordson Corporation

321 351A

Issued 7/01

69–LVL–EH–IS–01

WARNING: Allow only personnel with appropriate training and

experience to operate or service the equipment. The use of

untrained or inexperienced personnel to operate or service the

equipment can result in injury, including death, to themselves

and others, and damage to the equipment.

CAUTION: Hot surfaces! Avoid contact with the hot metal

surfaces of guns, hoses, and certain components of the melter.

If contact can not be avoided, wear heat-protective gloves and

clothing when working around heated equipment. Failure to

avoid contact with hot metal surfaces can result in personal

injury.

CAUTION: Some Nordson melters are specifically designed to

process Polyurethane Reactive (PUR) hot melt. Attempting to

process PUR in equipment not specifically designed for this

purpose can damage the equipment and cause premature

reaction of the hot melt. If you are unsure of the equipment’s

ability to process PUR, contact your Nordson representative for

assistance.

CAUTION: Before using any cleaning or flushing compound on

or in the equipment, read and comply with the manufacturer’s

instructions and the MSDS supplied with the compound. Some

cleaning compounds can react unpredictably with hot melt,

resulting in damage to the equipment.

CAUTION: Nordson hot melt equipment is factory tested with

Nordson Type R fluid that contains Polyester Adipate plasticizer.

Certain hot melt materials can react with Type R fluid and form

a solid gum that can clog the equipment. Before using the

equipment, confirm that the hot melt is compatible with Type R

fluid.