Operating instructions

Page 3 of 34
1.0 SAFETY PRECAUTIONS
CAUTION! The Sentry 1250/ST 1200 & Sentry/ST-1400 Systems
(“Sentry/ST Systems”) are contraindicated for use with certain medical
conditions and treatments. Always consult with the patient’s physician
before placing a patient on an alternating pressure system.
CAUTION! Bed frames used with the Sentry/ST Systems can vary greatly
depending on the specific health care setting, e.g., hospitals, nursing homes,
home care. Therefore, it is the responsibility of the caregiver to take the
necessary precautions to ensure the safety of the patient. This includes, but is
not limited to, the appropriate use of side rails to prevent falls and/or patient
entrapment.
Electronic Controller:
DANGER!
 Do not use in the presence of flammable anesthetics. Risk of explosion
can result.
 Exposure of the electronic controller to any liquid while it is plugged in
could result in a severe electrical hazard.
 Only use fuses that have the same specified rating (See Section 7.0
Product Specifications). Using fuses with higher ratings could result in
damage and/or injury.
CAUTION!
 Risk of Electric Shock. Do not open or attempt to repair or service the
electronic controller. Repairs and service should only be done by Tridien
Medical. If the controller is not functioning properly, or has been damaged,
unplug the unit and take it out of service immediately. Contact Customer
Service at 800-474-4225 or 954-340-0500 for repair and service
information.
 The electronic controller is a precision electronic product. Use care when
handling or transporting. Dropping, or other sudden impacts, may result in
damage to the controller.