Operating instructions

Page 21 of 34
The air cell assembly does not routinely need to be cleaned or
disinfected between patients. If cleaning/disinfection is required, follow
instructions in Section 5.2.2 above. All air cells, including the bolsters
are fully accessible and easily replaced.
5.5 Foam Overlay
The foam mattress is fully enclosed in a urethane cover and should not
require cleaning. However, if it does become “visibly” soiled, it may be
wiped down with disinfectant, ensuring that all surfaces come in contact
with the disinfectant. Wipe off with a clean damp cloth and allow to air
dry.
CAUTION! DO NOT machine wash or dry the Foam Overlay.
5.6 CPR
The exterior of the CPR assembly can be periodically wiped using a cloth
dampened with disinfectant. The CPR sleeve can be machine washed
but must be re-attached to protect CPR Assembly. This will ensure that in
the event the CPR pull is released, it will not fall to the floor and become
a trip hazard in an emergency situation.
5.7 Spare Parts
A spare parts list can be found on page 25 or at Tridien.com. NOTE! You
must be certified by Tridien to perform most controller repairs. Contact
Customer Service for more information.