Operating instructions

Page 15 of 34
Use the Up and Down Arrow keys to set the desired Fowler Boost
percentage increase. When done, press the Enter/Menu key to save and
return to the Main Screen.
SET CYCLE
Use the Up and Down arrow keys to select Set Cycle. Press the
Enter/Menu key. The default cycle time is 6 minutes.
Figure 12: AP Cycle Time Adjustment
Use the Up and Down arrow keys to set the desired Cycle time. When
done, press the Enter/Menu key to save and return to the Main Screen.
SET WEIGHT UNITS (Pounds/Kilograms)
From the main menu screen use the Up and Down arrow keys to select
Lbs/Kg. Press the Enter/Menu key. Choose either English units (Lbs =
Pounds), or SI units (Kg = Kilograms) by using the up and down arrow
keys.
Figure 13: Selection of Weight Units
Press the Enter/Menu key to save and return to the Main Screen.
EXIT
Select this option to make no changes and return to the Main Screen.
4.5 CPR OPERATION
The CPR pull provides the caregiver with the ability to rapidly deflate the
support surface in emergency situations.
4.5.1 Figure 14A shows the location of the CPR assembly on the left
lower side of the controller during normal operation.
4.5.2 Connecting the CPR Pull