Specifications

MAINTENANCE
21
S10 9007293 (2--10)
SIDE BRUSH
The side brush should be inspected daily for
wear or damage. Remove any string or wire
tangled from the side brush, side brush drive
hub, or shaft. The side brush should be
replaced when the remaining bristle length
measures 25 mm (1 in) in length.
REMOVING THE SIDE BRUSH
FOR SAFETY: Before leaving or servicing
machine; stop on level surface, set parking
brake, and turn off machine.
1. Pull the side brush arm up into the raised
position.
2. Remove the side brush mounting
hardware (B).
A
B
03144
A. Side Brush
B. Mounting Hardware
3. Slide the side brush (A) off the drive shaft.
IINSTALLING THE SIDE BRUSH
1. Slide the side brush (A) onto the drive
shaft.
2. Secure the side brush (A) with the
mounting hardware (B).
THERMO-SENTRY
The Thermo--Sentry, located inside the
hopper, senses the temperature of the air pulled
up from the hopper. If there is a fire in the
hopper, the Thermo--Sentry stops the vacuum
fan and cuts off the air flow. Press the button to
reset the Thermo--Sentry.
Home
Find...
Go To..