Specifications

MAINTENANCE
S10 9007293 (2--10)
20
BRUSHES
MAIN BRUSH
Inspect the main brush daily for wear or
damage. Remove any string or wire tangled on
the main brush, the main brush drive hub, or the
main brush idler hub.
REMOVING THE MAIN BRUSH
FOR SAFETY: Before leaving or servicing
machine; stop on level surface, set parking
brake, and turn off machine.
1. Place the main brush lift handle in the
(Main Brush Free-Float) position.
2. Open the main brush access door (D).
3. Pull the brush out of the brush
compartment.
INSTALLING THE MAIN BRUSH
NOTE: The hopper can be removed to aid
installing the main brush into the machine. See
REMOVING THE HOPPER in the OPERATION
section for proper procedure for removing the
hopper.
1. Slide the brush into the brush
compartment.
2. Rotate the brush until the slots on the
ends of the brush engage the keys on the
main brush drive hub (not shown).
NOTE: Do not force the main brush onto the
drive hub. When the main brush slots and drive
hub keys are properly aligned, the main brush
will easily engage the drive hub.
3. Close and secure the main brush access
door (D). Make sure the lift arm (B)
engages the idler lift arm pins (A).
D
C
A
B
02347
A. Lift Arm Pins
B. Lift Arm
C. Idler Key
D. Access Door
Home
Find...
Go To..