Specifications

OPERATION
S10 9007293 (2--10)
14
REMOVING THE HOPPER
1. Pull the main brush lever into the (Main
Brush Up) position.
2. Pull the side brush arm into the raised
position.
3. Turn off the machine. The filter will operate
for approximately 20 seconds.
NOTE: The filter shaker override switch must be
in the “on” position to automatically shake the
dust filter when the machine is turned off.
FOR SAFETY: Before leaving or servicing
machine; stop on level surface, set parking
brake, and turn off machine.
4. Lift the filter cover.
5. Seek assistance to remove the hopper
from the machine. Lift the hopper out of
the machine.
W ARNING: Heavy hopper. Do not
remove without help. Can cause back
strain.
6. Reinstall the hopper into the machine.
Make sure the hooks on hopper are
completely installed onto the machine.
7. Close the filter cover .
Home
Find...
Go To..