Specifications

OPERATION
13
S10 9007293 (2--10)
7. Turn the on-off switch key to the left.
Remove the key from the on-off switch.
FOR SAFETY: Before leaving or servicing
machine; stop on level surface, set parking
brake, and turn off machine.
EMPTYING THE HOPPER
1. Pull the main brush lever into the (Main
Brush Up) position.
2. Pull the side brush arm into the raised
position.
3. Slowly drive the machine up to the dump
site. Turn off the machine. The filter will
operate for approximately 20 seconds.
NOTE: The filter shaker override switch must be
in the “on” position to automatically shake the
dust filter when the machine is turned off.
FOR SAFETY: Before leaving or servicing
machine; stop on level surface, set parking
brake, and turn off machine.
4. Lift the filter cover.
5. Swing the dump lever (B) under the hook
(C); Lift the dump lever to dump the
hopper (A).
A
B
C
03142
A. Hopper
B. Dump Lever
C. Lever Hook
6. Engage the lever hook (not shown) to
keep the hopper in the “dump” position.
7. Slowly back the machine away from the
dump site or remove the hopper from the
machine to empty the contents from the
hopper.
NOTE:See REMOVING THE HOPPER in the
following section if it is necessary to remove the
hopper from the machine to empty the hopper.
8. Release the lever hook (not shown), lower
the hopper, and return the dump lever to
its storage location.
9. Lower the filter cover .
Home
Find...
Go To..