Specifications

OPERATION
S10 9007293 (2--10)
12
MACHINE OPERATION
PRE--OPERATION CHECKLIST
- Check the battery charge level.
- Check the hopper lip skirt for damage and
wear.
- Check the hopper seal for damage and
wear.
- Check the dust filter for damage.
- Check the condition of the main brush.
Remove any string, banding, plastic wrap,
or other debris wrapped around the brush.
- Check the main brush and rear brush skirts
for damage, wear , and clearance.
- Side Brush Option: Check the condition of
the side brush. Remove any string, banding,
plastic wrap, or other debris wrapped
around the brush.
- Check the service records to determine
maintenance requirements.
OPERATION ON GRADES
Drive the machine slowly on grades. The
maximum rated climb angle is 7_ or 12.2%.
FOR SAFETY: When Using Machine; Go
Slow On Grades And Slippery Surfaces.
SWEEPING
Plan the sweeping in advanc e. Try t o arrange
long runs wit h minimum s t opping and st ar t ing.
Overlap brush paths. Sweep as straight a path
as possible. Avoid bumping into posts or
scraping the sides of the sweeper. Sweep
debris fr om very nar row aisles int o main ais les
ahead of t im e. Do an ent ir e floor or sect ion at
one t im e.
Pick up oversize debris before sweeping. Pick
up pieces of wire, twine, or string, which could
become entangled in brush or brush plugs.
1. Turn the on--off switch key to the on
position.
2. Release the machine parking brake, if
equipped.
3. Move the main brush lever into the (Main
Brush Down) or (Main Brush Free-Float)
position.
4. Move the side brush arm into the down
position.
5. Sweep as required.
6. Raise the main brush and side brush.
Home
Find...
Go To..