Specifications

OPERATION
11
S10 9007293 (2--10)
CIRCUIT BREAKERS AND FUSES
Circuit breakers are resettable electrical circuit
protection devices that stop the flow of current
in the event of a circuit overload. Once a circuit
breaker has tripped, allow breaker to cool and
then press the reset button to manually reset
the breaker .
The fuse is a one-time protection device
designed to stop the flow of current in the event
of a circuit overload. The 15 A fuse is located
behind the hopper on the main frame.
NOTE: Always replace the fuse with a fuse of
the same type and amperage.
The following chart shows the various circuit
breakers and fuses and the electrical
components they protect.
PROTECTIVE
DEVICE RATING CIRCUIT
PROTECTED
CB--1 15 A Shaker Motor
CB--2 60 A Main Drive (Propel) Motor
FU--1 15 A Control Power
BRUSH INFORMATION
For best results, use the correct brush type for
the cleaning application. Listed below are the
brushes and the applications for which each is
best suited.
NOTE: The amount and type of soilage play an
important role in determining the type of
brushes to use. Contact a Tennant
representative for specific recommendations.
Nylon 6 -Double Row Main Brush --
Recommended for general sweeping, and has
good hopper loading. Nylon has the longest life
of the bristle types. Use this brush for sweeping
rough or irregular surfaces.
Polypropylene 6-Double Row Main Brush --
Superior pick-up of sand, gravel, and paper
litter. Polypropylene retains its stiffness when
wet and can be used indoors or outdoors with
equal performance. Not recommended for
high-temperature debris.
Fiber and Wire 6-Row Main Brush -- Offers
good sweeping action and pickup in heavy dust
concentrations. This brush is recommended
where soilage is slightly encrusted. The brush is
not recommended for heavy buildup or hard
packed soilage.
Natural Fiber 18- Row Main Brush -- T h e
natural choice for cleaning fine debris on carpet
and sweeping very heavy dust and other fine
particles on hard surfaces.
Home
Find...
Go To..