User manual

Copyright © 2012. All Rights Reserved. 9
www.sentryus.com R201204-V27
HARDWARE INSTALLATION
HARDWARE DESCRIPTION
Outdoor Unit:
A. Two layers silica gel: having double-waterproof
B. EMI prevent wire: To avoid electromagnetic interference
C. Nylon cable gland:IP68; Working Temp:-40°C~100°C
D. Half-screw: Not to fall
E. Panel Antenna:17 dBi gain; SMA connector
F. Access Point/Bridge: IEEE 802.11a -compliant
G. Power over Ethernet (POE) Splitter set: Output 5V DC / 3A
H. Mounting kit: Mounting Bracket on Mast with /U-bolts
* LED on the AP/Bride description:
On the AP/Bridge there are LED lights that inform you of the AP/Bridge’s current
status. Below is an explanation of each LED.