User manual

Copyright © 2012. All Rights Reserved. 43
www.sentryus.com R201204-V27
Wireless Client: This mode can be a client as general WLAN card in your WLAN
architecture. Input a SSID that you want to associate in right field. Using one computer
with Ethernet interface to connect this device, then the computer will has capacity of
WLAN association.
Wireless-G Settings
Access Point: This mode provides access for wireless stations to wired LANs and from
wired LANs to wireless stations. This mode is not only performing AP function but also
support WDS connection. Input remote AP’s MAC address in below 4 fields can
generate 4 WDS connections with this AP.
Repeater: This mode can be a repeater in your WLAN architecture. Input a SSID that
you want to associate in right field.
Wireless Client: This mode can be a client as general WLAN card in your WLAN
architecture. Input a SSID that you want to associate in right field. Using one computer
with Ethernet interface to connect this device, then the computer will has capacity of
WLAN association.
Change these settings as described here and click the Apply button to apply your
changes or click Cancel button to cancel your changes. For additional information, click
Help.